GB/T 15370.7-2017 Active National standards

GB/T 15370.7-2017 Agricultural tractors—General requirement—Part 7:Three-wheel boat tractors

GB/T 15370.7-2017 Agricultural tractors—General requirement—Part 7:Three-wheel boat tractors

Publish Date: 2017-09-29 Implement Date: 2018-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 15370.7-2017
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Tractor
ICS Name: Agricultural tractors and traction vehicles
Publish Date: 2017-09-29
Implement Date: 2018-04-01
Pages: 10 pages

Scope

This part of GB/T 15370 specifies the terms and definitions, model markings, technical requirements, test methods, inspection rules, delivery, marking, transportation, and storage of three-wheeled ship-type tractors. This part applies to three-wheeled ship-type tractors (hereinafter referred to as tractors).

Development Information

Word Count: 18 Thousand words Pages: 10 pages

Referenced Standards

GB/T 700-2006 Carbon structural steels GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 3871.1-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 1:General requirements GB/T 3871.1-2006 Agricultural tractors—Test procedures—Part 1:General requirements GB/T 3871.2-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 2:Measurements of tractor parameters GB/T 3871.2-2006 Agricultural tractors—Test procedures—Part 2:Measurements of tractor parameters GB/T 3871.3-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 3:PTO power tests GB/T 3871.3-2006 Agricultural tractors—Test procedures—Part 3:Power tests for power take-off GB/T 3871.3-2025 Agricultural tractors—Test procedures—Part 3:Power tests for power take-off GB/T 3871.4-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 4:Hydraulic lifting capacity and power tests GB/T 3871.4-2006 Agricultural tractors—Test procedures—Part 4:Rear three-point linkage lifting capacity GB/T 3871.4-2025 Agricultural tractors—Test procedures—Part 4:Rear three-point linkage lifting capacity GB/T 3871.5-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 5:Turning and clutch operating tests GB/T 3871.5-2006 Agricultural tractors—Test procedures—Part 5:Turning and clearance diameters GB/T 3871.5-2022 Agricultural tractors—Test procedures—Part 5:Turning and clearance diameters GB/T 3871.6-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 6:Braking tests GB/T 3871.6-2006 Agricultural tractors—Test procedures—Part 6:Determination of braking performance GB/T 3871.7-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 7:Measurements of operator's field vision GB/T 3871.7-2006 Agricultural tractors—Test procedures—Part 7:Operator’s field of vision GB/T 3871.7-2025 Agricultural tractors—Test procedures—Part 7:Operator′s field of vision to the front GB/T 3871.8-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 8:Measurements of noise GB/T 3871.8-2006 Agricultural tractors—Test procedures—Part 8:Noise measurement GB/T 3871.9-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 9:Drawbar power tests GB/T 3871.9-2006 Agricultural tractors—Test procedures—Part 9:Power tests for drawbar GB/T 3871.9-2025 Agricultural tractors—Test procedures—Part 9:Power tests for drawbar GB/T 3871.10-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 10:Low temperature starting tests GB/T 3871.10-2006 Agricultural tractors—Test procedures—Part 10:Low temperature starting GB/T 3871.11-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 11:Suitability tests for hot atmosphere GB/T 3871.11-2005 Agricultural tractors—Test procedures—Part 11:Suitability tests for hot atmosphere GB/T 3871.12-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 12:Working tests GB/T 3871.12-2005 Agricultural tractors—Test procedures—Part 12:Working tests GB/T 3871.13-2006 Agricultural tractors—Test procedures—Part 13:Measurement of exhaust smoke GB/T 3871.14-2006 Agricultural tractors—Test procedures—Part 14:Partial power PTO—Non-mechanically transmitted power GB/T 3871.15-2006 Agricultural tractors—Test procedures—Part 15:Centre of gravity GB/T 3871.15-2025 Agricultural tractors—Test procedures—Part 15: Centre of gravity GB/T 3871.16-2006 Agricultural tractors—Test procedures—Part 16:Axle power determination GB/T 3871.17-2006 Agricultural tractors—Test procedures—Part 17:Engine air cleaner GB/T 3871.18-2006 Agricultural tractors—Test procedures—Part18:Hydraulic power at tractor/implement interface GB/T 3871.18-2022 Agricultural tractors—Test procedures—Part 18:Hydraulic power at tractor/implement interface GB/T 3871.19-2006 Agricultural tractors—Test procedures—Part 19:Steering capability of wheeled tractors GB/T 3871.20-2015 Agricultural tractors—Test procedures—Part 20:Test methods of tractor bumpiness GB/T 3871.21-2015 Agricultural tractors—Test procedures—Part 21:Stability GB/T 9480-2001 Tractors machinery for agriculture and forestry,powered lawn and garden equipment—Operator's manuals—Content and presentation GB 10396-1999 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles GB 10396-2006 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles GB 18447.4-2008 Safety requirements for tractors—Part 4:Belt-drive wheeled tractors GB/T 19407-2003 Agricultural tractor—Maximum actuating forces required to operate controls GB/T 19407-2025 Agricultural tractors—Maximum actuating forces required to operate controls GB 20891 GB/T 20948-2007 Rear-view mirrors requirements for agricultural and forestry tractors GB/T 20948-2025 Tractors for agriculture and forestry—Devices for indirect vision—Technical specification GB/T 24645-2009 Slush seal performance of tractors—Test procedures GB/T 24648.1-2009 Assessment of tractor reliability JB/T 5673-2015 JBT 5673-2015 Agricultural and Forestry Tractors and Machinery Coating General Technical Specification JB/T 5673-1991 A general technical specification for painting of agricultural and forestry tractors and implements JB/T 6294-2014 Agricultural tractor type test rules JB/T 6294-2004 Type inspection rules for agricultural tractors JB/T 6294-2004 JB/T 6294-1992 Type approval and sampling test codes for agricultural tractors JB/T 6701-2018 tractor headlight JB/T 6701-2008 tractor headlight JB/T 6701-1993 tractor and agricultural truck front headlight JB/T 6712-2016 Tractor appearance quality requirements JB/T 6712-2004 Tractor appearance quality requirements JB/T 6712-1993 The appearance quality requirements for tractors JB/T 6714.2-2007 Agricultural tractor hydraulic suspension system test method JB/T 6714.2-1993 Agricultural tractor hydraulic suspension system test method JB/T 9831-2014 Modeling rules for agricultural and forestry tractors - JB/T 9831-2014 JB/T 9831-1999 Modeling rules for agricultural and forestry tractors JB/T 9831-1999 JB/T 9831-2025 Agricultural and forestry tractor model numbering regulations JB/T 9832.2-1999 Tractors and machinery for agriculture and forestry—Paints adherence performance—Cross-cut test JB/T 11972-2014 The symbols for the controls, indicators, and signaling devices of a tractor according to JB/T 11972-2014

Related Standards

Contact Us