GB/T 3480.5-2008 Replaced National standards

GB/T 3480.5-2008 Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials

Publish Date: 2008-12-04 Implement Date: 2009-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 3480.5-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Gears and gear transmissions

ICS Name: Gears and gear transmissions

Publish Date: 2008-12-04

Implement Date: 2009-06-01

Pages: 35 pages

Scope

This part of GB/T 3480 includes contact stress and tooth root bending stress, and gives the fatigue limit values.
This part specifies the material quality and heat treatment process, and introduces the influence of materials and processes on the two limit stress values.
The data in this part are applicable to the calculations in ISO 63362 and ISO 63363, and are suitable for industrial gears, high-speed and marine gears, as well as for the calculation of the bearing capacity of bevel gears.
The data in this part can be used in various gears, reference racks, gear tooth size determination and design processes in the above-mentioned standards, and the results are consistent with other various methods listed in the scope of application of ISO 63361.

Development Information

Word Count: 63 Thousand words Pages: 35 pages

Replace the following standards

GB/T 8539-2000 General specification for quality inspection of gear materials and their heat treatment

Superseded by the following standards

GB/T 3480.5-2021 Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials

Referenced Standards

ISO 643 ISO 683-1 ISO 683-9 ISO 683-10 ISO 683-11 ISO 1122-1 ISO 6336-1 ISO 6336-2 ISO 6336-3 ISO 9443 ISO 10474 ASTM A388 ASTM A609 ASTM E1444 GB/T 225-1988 Steel-hardenability test by end quenching(Jominy test) GB/T 225-2006 Steel—Hardenability test by end quenching (Jominy test) GB/T 1356-2001 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile GB/T 5617-2005 Determination of effective depth of hardening after induction or flame hardening of steel GB/T 9450-2005 Steels—Determination and verification of the depth of carburized and hardened cases GB/T 10095.1-2001 Cylindrical gears—system of accuracy—Part 1:Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth GB/T 10095.1-2008 Cylindrical gears—System of accuracy—Part 1:Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth GB/T 10095.1-2022 Cylindrical gears—ISO system of flank tolerance classification—Part 1:Definitions and allowable values of deviations relevant to flanks of gear teeth GB/T 10561-1989 Steel—Determination of content of non-metallic inclusion—Micrographic method using standard diagrams GB/T 10561-2005 Steel—Determination of content of nonmetallic inclusions—Micrographic method using standards diagrams GB/T 10561-2023 Determination of content of nonmetallic inclusions in steel—Micrographic method using standard diagrams GB/T 13304-1991 Steels—Classification GB/T 13304.1-2008 Steels classification—Part 1:Classification of according to chemical composition GB/T 13304.2-2008 Steels classification—Part 2:Classification of according to main quality classes and main property or application characteristics GB/T 17879-1999 Gears—Surface temper etch inspection after grinding GB/T 17879-2023 Gear—Surface temper etch inspection after grinding,chemical method GB/T 5617-2025 Determination of surface hardening depth for steel GB/T 9450-2025 Determination of the case hardening depth for steel

Adopt standards

ISO 6336-5:2003

Related Standards

GB/T 4133-1984 Replaced

GB/T 4133-1984 The type and dimensions for positive drive of Morse tapers

Publish Date: 1984-01-18

GB/T 6404-1986 Replaced

GB/T 6404-1986 Determination of sound power level for noise emitted by gear units

Publish Date: 1986-05-19

GB 6413-1986 Abolished

GB 6413-1986 Calculation of scuffing load capacity for involute cylindrical gears

Publish Date: 1986-05-24

GB/T 6443-1986 Replaced

GB/T 6443-1986 Involute cylindrical gears-Information of the dimensional data to be given on the drawing

Publish Date: 1986-06-07

GB/T 1357-1987 Replaced

GB/T 1357-1987 Modules of involute cylindrical gears

Publish Date: 1987-06-11

GB/T 8543-1987 Replaced

GB/T 8543-1987 Determination of mechanical vibrations of gear units during acceptance testing

Publish Date: 1987-12-05