GB/T 12667-1990
Replaced
GB/T 22712-2008
Replaced
National standards
GB/T 22712-2008 Specification for G series cooling fans applying to variable frequency motors
GB/T 22712-2008 Specification for G series cooling fans applying to variable frequency motors
Basic Information
Standard Code:
GB/T 22712-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Synchronous motor
ICS Name:
Electric motor
Publish Date:
2008-12-30
Implement Date:
2009-10-01
Pages:
9 pages
Scope
This standard specifies the types, basic parameters, and dimensions of G-series cooling fans for YVF2 series (IP54) frequency-controlled three-phase asynchronous motors powered by frequency converters, as well as technical requirements, inspection rules, marking, packaging, and warranty period requirements.
This standard applies to G-series cooling fans (axial flow type) for YVF2 series (IP54) frequency-controlled three-phase asynchronous motors powered by frequency converters (hereinafter referred to as fans). Fans for other series of frequency-controlled three-phase asynchronous motors powered by frequency converters can also refer to this standard for fan selection. All fans derived from this fan can also refer to and implement this standard.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB/T 1032-2005 Test procedures for three-phase induction motors
GB/T 1236-2000 Industrial fans—Performance testing using standardized airways
GB/T 1971-2006 Rotating electrical machines—Terminal markings and direction of rotation
GB/T 1993-1993 Cooling methods for rotating electrical machines
GB/T 2888-2008 Methods of noise measurement for fans blowers compressors and Roots blowers
GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined(IP code)—Classification
GB/T 5171-2002 General technical requirements for small power motors
GB/T 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity
GB 12350-2000 Safety requirements of small power motors
GB/T 12665-2008 Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 6445-2005 Industrial blower impeller overspeed test
JB/T 9615.2-2000 The inter-turn insulation test limit value for the loose-wound winding of low-voltage motors
JB/T 10562-2006 General Purpose Axial Flow Fan Technical Specification
JB/T 7118-2004 YVF2 series (IP54) dedicated three-phase asynchronous motor for frequency conversion and speed regulation with frame sizes ranging from 80 to 315
JB/T 8658-1997 External-rotor low-noise three-phase asynchronous motor
JB/T 9101-1999 Fan rotor balancing
JB/T 9615.1-2000 Test Method for Inter-Winding Insulation of AC Low-Voltage Motors with Embedded and Wrapped Windings
Related Standards
GB/T 12974-1991
Replaced
GB/T 12974-1991 General specification for a.c. lift motors
GB/T 13138-1991
Replaced
GB/T 13138-1991 Synchros General specification for
GB/T 13139-1991
Replaced
GB/T 13139-1991 Hysteresis synchronous motors General specification for
GB/T 13500-1992
abolished_transferred
GB/T 13500-1992 Three phase asynchronous motors for hermetic refrigeration compressors—General specifications
GB/T 13501-1992
Replaced