GB/T 1431-1985
Replaced
DB32/T 3878-2020
Active
Jiangsu ProvinceLocal standards
DB32/T 3878-2020 Furnace sintering non-bearing self-insulating masonry block (brick) application technical specification
DB32/T 3878-2020 Furnace sintering non-bearing self-insulating masonry block (brick) application technical specification
Basic Information
Standard Code:
DB32/T 3878-2020
Standard Type:
Local standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wall materials
ICS Name:
Comprehensive Building Materials
Publish Date:
2020-10-13
Implement Date:
2020-11-13
Pages:
20 pages
Scope
This standard specifies the terms and definitions, basic requirements, materials, design, construction, and acceptance for the application of solid waste sintered non-load-bearing self-insulated masonry blocks (bricks).
This standard is applicable to the engineering design, construction, and acceptance of external self-insulated systems using solid waste sintered non-load-bearing self-insulated masonry blocks (bricks) in new civil buildings in areas with an earthquake resistance intensity of 8 or lower in Jiangsu Province.
Development Information
Referenced Standards
GB/T 2542-2003 Test methods for wall bricks
GB/T 2542-2012 Test methods for wall bricks
GB 6566-2001 Limit of radionuclides in building materials
GB 6566-2010 Limits of radionuclides in building materials
GB/T 11969-1997 General requirements for test methods of aerated concrete
GB/T 11969-2008 Test methods of autoclaved aerated concrete
GB/T 11969-2020 Test methods of autoclaved aerated concrete
GB/T 25181-2010 Ready-mixed mortar
GB/T 25181-2019 Ready-mixed mortar
GB/T 26538-2011 Fired heat preservation brick and block
GB/T 29906-2013 External thermal insulation composite systems based on expanded polystyrene
GB/T 32981-2016 Test method for effective thermal conductivity of wall materials
GB 50011-2010 Code for seismic design of buildings
GB 50016-2014 Code for fire protection design of buildings
GB 50189-2015 Design standard for energy efficiency of public buildings
GB 50176-2016 Code for thermal design of civil building
GB 50210-2018 Standard for construction quality acceptance of building decoration
GB 50300-2013 Unified standard for constructional quality acceptance of building engineering
GB 50411-2019 Standard for acceptance of energy efficient building construction
JC/T 2493-2018 JC/T 2493-2018 Construction composite insulated panel for building that does not require demolition
JG/T 366-2012 Anchors for fixing of thermal insulation composite systems
JGJ/T 104-2011 Specification for winter construction of building engineering
JGJ 253-2011 Technical specification for thermal insulating systems of inorganic lightweight aggregate mortar
QB/T 3897
DGJ32/J 16
DGJ32/J 19
DGJ32/J 23
DGJ32/J 71
GB 50003-2011 Code for design of masonry structures
GB 50118-2010 Code for design of sound insulation of civil buildings
GB 50203-2011 Code for acceptance of constructional quality of masonry structures
GB 50204-2015 Concrete Structure Construction Quality Acceptance Standards
GB 50666-2011 Code for construction of concrete structures
JGJ 59-2011 Standard for construction safety inspection
JGJ 162-2008 Technical code for safety of forms in construction
JGJ/T 70-2009 Standard for test method of basic properties of construction mortar
JGJ/T 235-2011 Technical specification for waterproofing of exterior wall of building
JGJ/T 253-2019 Technical standard for thermal insulating systems of inorganic lightweight aggregate mortar
Related Standards
GB/T 16546-1996
Replaced
GB/T 16546-1996 Shaped refractory products—Packing, marking, transportation and storage
GB/T 9086-2007
Active
GB/T 9086-2007 The white standard plate for colorimetry and photometry
GB/T 16259-2008
Active
GB/T 16259-2008 Test method for in accel erated weathering building materials
GB/T 5950-2008
Active
GB/T 5950-2008 Method for measurement of whiteness of building materials and non-metal mineral products
GB/T 13891-2008
Active