GB/T 14741-1993
Replaced
T/CHPSA QD002-2024 T/CMES 24018-2024
Active
Group standards
T/CHPSA QD002-2024 T/CMES 24018-2024 Bus protocol pneumatic valve island—Technical specification
T/CHPSA QD002-2024 T/CMES 24018-2024 Bus protocol pneumatic valve island—Technical specification
Basic Information
Standard Code:
T/CHPSA QD002-2024 T/CMES 24018-2024
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Hydraulic and pneumatic devices
ICS Name:
Pneumatic transportation and its components
Publish Date:
2024-07-01
Implement Date:
2024-08-01
Pages:
20 pages
Scope
This document specifies the general requirements, performance requirements, test methods, inspection rules, marking, packaging, accompanying documents, storage, and labeling instructions for pneumatic valve islands with a bus protocol.
This document is applicable to pneumatic valve islands (hereinafter referred to as "valve islands") that operate with compressed air, are controlled by a bus protocol, and have a maximum working pressure of no more than 1.6 MPa.
Development Information
Referenced Standards
GB/T 786.1-1993 Fluid power systems and components—Graphic symbols and circuit diagrams—Part 1:Graphic symbols
GB/T 786.1-2009 Fluid power systems and components—Graphic symbols and circuit diagrams—Part 1:Graphic symbols for conventional use and data-processing applications
GB/T 786.1-2021 Fluid power systems and components—Graphical symbols and circuit diagrams—Part 1:Graphical symbols
GB/T 2346-2003 Fluid power systems and components-Nominal pressures
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 17446-1998 Fluid power systems and components—Vocabulary
GB/T 17446-2012 Fluid power systems and components—Vocabulary
GB/T 17446-2024 Fluid power systems and components—Vocabulary
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields
GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
JB/T 5967-2007 The quality level of the air medium used for pneumatic components and systems
JB/T 6378-2008 Pneumatic directional control valve technical specification
JB/T 6378-1992 Pneumatic reversing valve technical specification
IEC 61076-2-101
Related Standards
GB/T 14742-1993
Replaced
GB/T 14742-1993 Test methods of port pneumatic grain unloader
JB/T 14789-2024
Active
JB/T 14789-2024 JBT 14789-2024 Terms for pneumatic conveying system
JB/T 20107-2007
Abolished
JB/T 20107-2007 Pharmaceutical horizontal fluidizing dryer
T/CHPSA QD002-2024
Active
T/CHPSA QD002-2024
T/CRIA 16012-2022
Active