GB 4962-1985
Replaced
GB/T 5829-2006
Replaced
National standards
GB/T 5829-2006 Krypton
GB/T 5829-2006 Krypton
Basic Information
Standard Code:
GB/T 5829-2006
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Industrial gases and chemical gases
ICS Name:
Industrial gases
Publish Date:
2006-09-01
Implement Date:
2007-02-01
Pages:
12 pages
Scope
This standard specifies the requirements for krypton gas, test methods, and packaging, marking, storage, transportation, and safety. This standard applies to gaseous krypton extracted from air by cryogenic methods. It is mainly used in the electron vacuum and electric light source industries, as well as in lasers, medical and health fields. Krypton gas is a colorless, odorless, and inert gas. Molecular formula: Kr. Relative molecular mass: 83.798 (based on the 2001 International Relative Atomic Mass).
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
《气瓶安全监察规程》
GB 190-1990 Labels for packages of dangerous goods
GB 190-2009 Packing symbol of dangerous goods
GB/T 5099-1994 Seamless steel gas cylinders
GB/T 5099.1-2017 Seamless steel gas cylinders—Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
GB/T 5099.3-2017 Seamless steel gas cylinders—Part 3:Normalized cylinders
GB/T 5099.4-2017 Seamless steel gas cylinders—Part 4:Seamless stainless steel gas cylinders
GB/T 5832.1-2003 Determination of moisture in gases—Part 1:Electrolytic method
GB/T 5832.1-2016 Gas analysis—Determination of moisture—Part 1:Electrolytic method
GB/T 5832.2-1986 Determination of trace water in the gases—Dew point method
GB/T 5832.2-2008 Determination of moisture in gases—Part 2:Dew point method
GB/T 5832.2-2016 Gas analysis—Determination of moisture—Part 2:Dew point method
GB/T 6681-2003 General rules for sampling gaseous chemical products
GB 7144-1999 Colored cylinder mark for gases
GB/T 7144-2016 Coloured cylinder mark for gases
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 8981-2008 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 8984.1-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 1:Determination of carbon monoxide,carbon dioxide and mathane in the gases—Gas chromatographic method
GB 14194-1993 Rules for filling of permanent gas cylinders
GB/T 14194-2006 Rules for filling of permanent gas cylinders
GB/T 14194-2017 Rules for filling of compressed gas cylinders
GB 15258-1999 General rules for preparation of precautionary label for industrial chemicals
GB 15258-2009 General rules for preparation of precautionary label for chemicals
GB 16483-2000 General rules for preparation of chemical safety data sheet
GB/T 16483-2008 Safety data sheet for chemical products—Content and order of sections
GB 16912-1997 Safety technical regulation for oxygen and relative gases
GB 16912-2008 Safety technical regulation for oxygen and relative gases produced with cryogenic method
HG/T 2686-1995 The determination of trace amounts of hydrogen, oxygen, methane, and carbon monoxide in inert gases using a zirconia detector in gas chromatography
Related Standards
GB/T 8981-1988
Replaced
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 10627-1989
Replaced
GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 10628-1989
Replaced
GB/T 10628-1989 Gas analysis—Determination of composition of calibration gas mixtures—Comparison methods
GB 13548-1992
Replaced
GB 13548-1992 General principle of safety assessment for phosgene and its products plant
GB 13591-1992
Replaced