CJ/T 133-2007 Replaced Industry standards-Urban construction

CJ/T 133-2007 Integrated circuit card water meter

CJ/T 133-2007 Integrated circuit card water meter

Publish Date: 2007-01-17 Implement Date: 2007-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: CJ/T 133-2007
Standard Type: Industry standards
Standard Status: Replaced
is_force_gb: no
CCS Name: Water supply and drainage projects
ICS Name: The facilities in the building
Publish Date: 2007-01-17
Implement Date: 2007-07-01
Pages: 20 pages

Scope

This standard specifies the terms and definitions, general requirements, metrological characteristics, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of IC card cold water meters (hereinafter referred to as IC card water meters).
This standard applies to IC card water meters with a nominal diameter of less than or equal to 40 mm. IC card water meters shall comply with the provisions of this standard and the relevant provisions of GB/T 778.1-1996 and GB/T 778.3-1996.
TM card cold water meters shall be implemented in accordance with this standard.

Development Information

Word Count: 28 Thousand words Pages: 20 pages

Replace the following standards

Superseded by the following standards

Referenced Standards

GB/T 778.1-1996 Measurement of water flow in closed conduits—Meters for cold potable water—Part 1:Specifications GB/T 778.3-1996 Measurement of water flow in closed conduits—Meters for cold potable water—Part 3:Test methods and equipment GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 15464-1995 General-purpose specification for the packaging of instrumentation products GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test CJ/T 166-2006 Integrated circuit card application technology of construction cause CJ/T 166-2014 Technology specification for application of integrated circuit cards in construction cause JB/T 9329-1999 Instrument transportation, basic environmental conditions for storage and transportation, and test methods CJ/T 166-2002 IC Card Application Technology for Construction Industry SJ/T 11166-1998

Related Standards

Contact Us