GB 4580-1984
Replaced
GB/T 24146-2009
Replaced
National standards
GB/T 24146-2009 Rubber hoses and hose assemblies for use in oil burners—Specification
GB/T 24146-2009 Rubber hoses and hose assemblies for use in oil burners—Specification
Basic Information
Standard Code:
GB/T 24146-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Rubber hoses, adhesive tapes, and rubber cloths
ICS Name:
\nHose
Publish Date:
2009-06-15
Implement Date:
2010-02-01
Pages:
10 pages
Scope
This standard specifies the minimum requirements for rubber hoses and hose assemblies used in oil burners.
This standard specifies two types of hose assemblies:
Type 1: Hose assemblies used for outflow and return without being inserted between the oil burner pump and the atomizer connection, with a maximum working pressure of 1.0 MPa and a maximum oil temperature of 100 ℃.
Type 2: Hose assemblies inserted between the oil burner pump and the atomizer connection, with a working pressure of 4.0 MPa and a maximum oil temperature of 100 ℃.
Note: For applications other than oil burner devices, the hose assemblies specified in this standard should not be used without special evaluation.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 3683.1-2006 Rubber hoses and hose assemblies—Wire-braid-reinforced hydraulic types—Specification—Part 1:Oil-based fluid applications
GB/T 5564-2006 Rubber and plastics hoses—Subambient temperature flexibility tests
ISO 188
ISO1817:1985
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 5563-1994 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2006 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 6031-1998 Rubber,vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 6031-2017 Rubber,vulcanized or thermoplastic—Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 9573-2003 Rubber and plastics hose and hose assemblies—Methods of measurement of dimensions
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies—Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
GB/T 9575-2003 Rubber and plastics hoses for general—Purpose industrial applications-Bore diameters and tolerances,and tolerances on length
GB/T 9575-2013 Rubber and plastics hoses—Hose sizes, minimum and maximum inside diameters,and tolerances on cut-to-length hoses
GB/T 24134-2009 Rubber and plastics hoses—Assessment of ozone resistance under static conditions
GB/T 5563-2025 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
Adopt standards
ISO 6806:1992
Related Standards
GB/T 16590.1-1996
abolished_transferred
GB/T 16590.1-1996 Rubber and plastics hoses, non-collapsible, for fire-fighting service—Part 1:Semi-rigid reel hose for fixed first-aid installations
GB/T 16591-1996
Replaced
GB/T 16591-1996 Rubber hose and hose assemblies for transferring anhydrous ammonia
GB/T 10544-2003
Replaced
GB/T 10544-2003 Rubber hoses and hose assemblies—Rubber—covered, spiral wire reinforced, hydraulic type
GB 10543-2003
Replaced
GB 10543-2003 Rubber hose and hose assemblies for aircraft ground fuelling and defuelling
GB/T 20023-2005
Active