GB/T 32076.6-2015 Active National standards

GB/T 32076.6-2015 High-strength structural bolting assemblies for preloading—Part 6:Plain chamfered washers

GB/T 32076.6-2015 High-strength structural bolting assemblies for preloading—Part 6:Plain chamfered washers

Publish Date: 2015-10-09 Implement Date: 2016-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 32076.6-2015

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: Gaskets, locking parts

Publish Date: 2015-10-09

Implement Date: 2016-06-01

Pages: 6 pages

Scope

This part of GB/T 32076, together with GB/T 32076.1, specifies quenched and tempered chamfered flat washers for high-strength bolt and nut assemblies with a specification of 12 mm to 36 mm and in the large hexagonal series. Note: To achieve satisfactory results, it is very important to ensure the correct use of the washers. For the correct method of use, please consult or refer to the relevant specifications. This part is applicable to high-strength bolt and nut assemblies for industrial and civil buildings, bridges, tower structures, boiler steel structures, lifting machinery, and other steel structures. Appendix A provides a description of two application types of bolt and nut assemblies for European steel structures.

Development Information

Word Count: 10 Thousand words Pages: 6 pages

Same series standard

GB/T 32076.1-2015 High-strength structural bolting assemblies for preloading—Part 1:General requirements GB/T 32076.2-2015 High-strength structural bolting assemblies for preloading—Part 2:Suitability for preloading GB/T 32076.3-2015 High-strength structural bolting assemblies for preloading—Part 3:System HR—Hexagon bolt with large width across flats and nut assemblies GB/T 32076.4-2015 High-strength structural bolting assemblies for preloading—Part 4:System HV—Hexagon bolt with large width across flats and nut assemblies GB/T 32076.5-2015 High-strength structural bolting assemblies for preloading—Part 5:Plain washers GB/T 32076.7-2015 High-strength structural bolting assemblies for preloading—Part 7:M39～M64—Hexagon bolt with large width acrossflats and nut assemblies

Referenced Standards

GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 1237-2000 Designation system for fasteners GB/T 3103.3-2000 Tolerances for fasteners—Plain washers GB/T 3103.3-2020 Tolerances for fasteners—Plain washers GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.3-2008 Fasteners—Hot dip galvanized coatings GB/T 32076.1-2015 High-strength structural bolting assemblies for preloading—Part 1:General requirements GB/T 3104-1982 Fasteners--Widths across flats of hexagon products

Related Standards

GB/T 878-1986 Replaced

GB/T 878-1986 Parallel pins with external thread

Publish Date: 1986-07-02

GB/T 94.1-1987 Replaced

GB/T 94.1-1987 Specifications for spring washers—Single coil spring lock washers

Publish Date: 1987-02-05

GB/T 94.3-1987 Replaced

GB/T 94.3-1987 Specifications for spring washers—Curved and wave spring washers

Publish Date: 1987-02-05

GB/T 854-1988 Active

GB/T 854-1988 Tab washers with long tab

Publish Date: 1988-01-06

GB/T 1230-1991 Replaced

GB/T 1230-1991 High strength plain washers for steel structures

Publish Date: 1991-04-22

GB/T 3103.3-2000 Replaced

GB/T 3103.3-2000 Tolerances for fasteners—Plain washers

Publish Date: 2000-09-26