GB/T 10230.1-2007 Replaced National standards

GB/T 10230.1-2007 Tap-changers—Part 1:Performance requirements and test methods

GB/T 10230.1-2007 Tap-changers—Part 1:Performance requirements and test methods

Publish Date: 2007-07-02 Implement Date: 2008-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 10230.1-2007

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Transformer

ICS Name: Transformers, reactors, and inductors

Publish Date: 2007-07-02

Implement Date: 2008-07-01

Pages: 58 pages

Scope

This part of GB 10230 applies to resistance and reactance on-load tap-changers, no-excitation tap-changers, and their electric actuators. It is mainly applicable to tap-changers immersed in transformer oil that meets IEC 60296 1). If the conditions are suitable, it can also be applied to gas-insulated or tap-changers immersed in other insulating oils.
This part is applicable to all types of power transformers, distribution transformers, and reactors used in tap-changers.
This part is not applicable to tap-changers used in traction transformers and traction reactors.
Note: Tap-changers used in traction transformers and traction reactors can refer to this part, and the relevant performance indicators shall be negotiated between the manufacturer and the user.

Development Information

Word Count: 105 Thousand words Pages: 58 pages

Same series standard

GB/T 10230.2-2007 Tap-changers—Part 2:Application guide

Replace the following standards

GB 10230-1988

Superseded by the following standards

GB/T 10230.1-2019 Tap-changers—Part 1:Performance requirements and test methods

Referenced Standards

GB 1094.1-1996 Power transformers—Part 1:General GB/T 1094.3-2003 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air GB/T 10230.2-2007 Tap-changers—Part 2:Application guide IEC 60296:2003 GB/T 4109-1999 Technical specification of high voltage bushing GB/T 4109-2008 Insulated bushings for alternating voltages above 1 000 V GB/T 4109-2022 Insulated bushings for alternating voltages above 1 000 V GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 7354-2003 Partial discharge measurements GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements GB/T 15164-1994 Loading guide for oil-immersed power transformers GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements GB/T 16927.2-1997 High-voltage test techniques Part 2:Measuring systems GB/T 16927.2-2013 High-voltage test techniques—Part 2:Measuring systems

Adopt standards

IEC 60214-1:2003

Related Standards

GB 6450-1986 Replaced

GB 6450-1986 Dry-type power transformers

Publish Date: 1986-05-29

GB/T 7449-1987 Replaced

GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors

Publish Date: 1987-03-16

GB 13028-1991 Abolished

GB 13028-1991 Isolating transformers and safety isolating transformers Requirements

Publish Date: 1991-07-15

GB/T 14006-1992 Active

GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations

Publish Date: 1992-12-17

GB/T 14860-1993 Replaced

GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment

Publish Date: 1993-12-30

GB/T 15164-1994 Replaced

GB/T 15164-1994 Loading guide for oil-immersed power transformers

Publish Date: 1994-07-07