GB 6450-1986
Replaced
GB/T 10230.1-2019
Active
National standards
GB/T 10230.1-2019 Tap-changers—Part 1:Performance requirements and test methods
GB/T 10230.1-2019 Tap-changers—Part 1:Performance requirements and test methods
Price:
$ 155
Basic Information
Standard Code:
GB/T 10230.1-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2019-12-31
Implement Date:
2020-07-01
Pages:
77 pages
Scope
This part of GB/T 10230 specifies the terms and definitions of tap changers, their conditions of use, the technical requirements for on-load tap changers, the technical requirements for the electric actuators of on-load tap changers, the technical requirements for off-load tap changers, the technical requirements for the electric actuators of off-load tap changers, nameplates, warning labels for off-load tap changers, and the manufacturer's user manuals.
This part applies to resistive and inductive on-load tap changers, off-load tap changers, and their electric actuators.
This part applies to tap changers immersed in mineral insulating oil that comply with GB 2536. If conditions permit, it can also apply to tap changers insulated by gas or immersed in other insulating liquids.
This part is mainly applicable to on-load tap changers with arc contacts. If conditions permit, it can also apply to on-load tap changers without arcs (for example, electronic conversion).
This part applies to tap changers for all types of power transformers and distribution transformers, as well as reactors.
This part does not apply to tap changers for traction transformers and traction reactors, or to tap changers for tuned reactors.
Development Information
Replace the following standards
Referenced Standards
GB/T 1094.7-2008 Power transformers—Part 7:Loading guide for oil-immersed power transformers
GB 2536-1990 Transformer oils
GB 2536-2011 Fluids for electrotechnical applications—Unused mineral insulating oils for transformers and switchgear
GB/T 2900.95-2015 Electrotechnical terminology—transformers,voltage regulators and reactors
GB/T 4109-1999 Technical specification of high voltage bushing
GB/T 4109-2008 Insulated bushings for alternating voltages above 1 000 V
GB/T 4109-2022 Insulated bushings for alternating voltages above 1 000 V
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 7354-2003 Partial discharge measurements
GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements
GB/T 10230.2-2007 Tap-changers—Part 2:Application guide
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
GB/T 1094.7-2024 Power transformers—Part 7:Loading guide for mineral-oil-immersed power transformers
GB 2536-2025 Fluids for electrotechnical applications—Unused mineral insulating oils for transformers and switchgear
GB/T 10230.2-2025 Tap changers—Part 2:Application guidelines
Adopt standards
IEC 60214-1:2014
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced