GB/T 5327-1985
Replaced
GB/T 14193-2009
Replaced
National standards
GB/T 14193-2009 Rules for filling of liquefied gas cylinders
GB/T 14193-2009 Rules for filling of liquefied gas cylinders
Basic Information
Standard Code:
GB/T 14193-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Gas separation and liquefaction equipment
ICS Name:
Surfactants and other auxiliary agents
Publish Date:
2009-06-25
Implement Date:
2010-04-01
Pages:
16 pages
Scope
This standard specifies the basic principles and safety technical requirements for the filling of liquefied gas cylinders (hereinafter referred to as "cylinders").
This standard applies to the filling of high-pressure liquefied gas cylinders and low-pressure liquefied gas cylinders with a saturated vapor pressure of not less than 0.1 MPa (gauge pressure, hereinafter the same) at the maximum operating temperature.
This standard does not apply to the filling of liquefied petroleum gas steel cylinders for motor vehicles.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 7144-1999 Colored cylinder mark for gases
GB/T 7144-2016 Coloured cylinder mark for gases
GB/T 13005-1991 Terminology of gas cylinders
GB/T 13005-2011 Terminology of gas cylinders
GB 15383-1994 Outlet connections and sizes for cylinder valves
GB/T 15383-2011 Connection types and dimensions for gas cylinder valve outlets
GB 16804-1997 Precautionary labels for gas cylinders
GB/T 16804-2011 Precautionary labels for gas cylinders
Related Standards
GB/T 5328-1985
Active
GB/T 5328-1985 Surface active agents—Simplified classification
GB/T 5553-1985
Replaced
GB/T 5553-1985 Surface active agents—Textile auxiliaries—Method for determination of water repellency of waterprooting agents—Hydrostatic pressure test
GB/T 5554-1985
Replaced
GB/T 5554-1985 Surface active agents—Textile auxiliaries—method for determination of water repellency of waterprooting agents—Spray test
GB/T 6365-1986
Replaced
GB/T 6365-1986 Surface active agents—Determination of free alkalinity or free acidity—Titrimetric method
GB/T 6369-1986
Replaced