GB/T 6462-1986
Replaced
GB/T 19822-2024
Active
National standards
GB/T 19822-2024 Specification for hard anodic oxidation coatings on aluminium and its alloys
GB/T 19822-2024 Specification for hard anodic oxidation coatings on aluminium and its alloys
Price:
$ 75
Basic Information
Standard Code:
GB/T 19822-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
\nMetal plating
Publish Date:
2024-06-29
Implement Date:
2025-01-01
Pages:
24 pages
Scope
This document specifies the requirements for hard anodized films on aluminum and aluminum alloys, and describes the test methods for hard anodized films on aluminum and aluminum alloys.
This document also stipulates the information that the purchaser should provide to the supplier (see Appendix A).
This document applies to hard anodized films on aluminum and aluminum alloys. It does not apply to films produced by processes such as plasma electrolytic oxidation, micro-arc oxidation, plasma chemical anodizing, anodic spark deposition, or spark anodizing.
Development Information
Replace the following standards
Referenced Standards
ISO 2106
GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness-Eddy current
GB/T 6462-1986 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 8005.3-2008 Aluminium and aluminium alloys—Terms and definitions—Part 3:Surface treatment
GB/T 8754-1988 Anodizing of aluminium and aluminium alloys—Insulation check by measurement of breakdown potential
GB/T 8754-2006 Anodizing of aluminium and its alloys—Insulation check by measurement of breakdown potential
GB/T 8754-2022 Anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Determination of electrical insulation
GB/T 9258.1-2000 Coated abrasives—Grain size analysis—Part 1:Grain size distribution test
GB/T 9790-1988 Metallic and related coatings—Vickers and Knoop microhardness tests
GB/T 9790-2021 Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys—Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
GB/T 4957-2025 Non-conductive coatings on non-magnetic electrically conductive base metals—Measurement of coating thickness—Amplitude-sensitive eddy-current method
GB/T 6462-2025 Metallic and oxide coatings—Measurement of coating thinckness—Microscopical method
Adopt standards
ISO 10074:2021
Related Standards
GB/T 6463-1986
Replaced
GB/T 6463-1986 Metallic and other non-organic coatings—Review of methods of measurement of thickness
GB/T 6465-1986
Replaced
GB/T 6465-1986 Metallic and other non-organic coatings—Corrodkote corrosion test(CORR test)
GB/T 6466-1986
Replaced
GB/T 6466-1986 Electrodeposited chromium coatings—Electrolytic corrosion testing (EC test)
GB/T 6808-1986
Abolished
GB/T 6808-1986 Anodizing of aluminium and its alloys—Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
GB/T 8013-1987
Replaced