GB/T 14428-1993
Abolished
QC/T 1236-2025
Active
Industry standards-Car
QC/T 1236-2025 Cooling pump for fuel cell systems
QC/T 1236-2025 Cooling pump for fuel cell systems
Price:
$ 59.00
Basic Information
Standard Code:
QC/T 1236-2025
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
New energy vehicles and other types of vehicles
ICS Name:
Tram
Publish Date:
2025-12-29
Implement Date:
2026-07-01
Pages:
32 pages
Scope
This document specifies the technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage requirements for cooling water pumps used in fuel cell engines.
This document applies to cooling water pumps used in road vehicles with a maximum operating voltage of Class B voltage (hereinafter referred to as "cooling water pumps").
Note: Class B voltage refers to a maximum operating voltage greater than 30 V AC (rms) and less than or equal to 1,000 V AC (rms), or greater than 60 V DC and less than or equal to 1,500 V DC.
Development Information
Referenced Standards
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.56-2023 Environmental testing—Part 2:Test methods—Test Fh:Vibration,broadband random and guidance
GB/T 3821-2015 Small and medium power internal combustion engines—Cleanliness limits and measurements
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 18384-2020 Electric vehicles safety requirements
GB/T 18488-2024 Drive motor system for electric vehicles
GB/T 18655-2025 Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
GB/T 19951-2019 Road vehicles—Disturbances test methods for electrical/electronic component from electrostatic discharge
GB/T 21437.2-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2:Electrical transient conduction along supply lines only
GB/T 21437.3-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
GB/T 23263-2009 Determination of asbestos in products
GB/T 23263-2024 Determination of asbestos in products
GB/T 24548-2009 Fuel cell electric vehicles—Terminology
GB/T 28046.2-2019 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2:Electrical loads
GB/T 28046.3-2011 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 3:Mechanical loads
GB/T 28046.4-2011 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 4:Climatic loads
GB/T 29529-2013 Methods of measuring and evaluating noise of pumps
GB/T 30512-2014 Requirements for prohibited substances on automobiles
GB/T 33014.2-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 2:Absorber-lined shielded enclosure
GB/T 33014.4-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 4:Bulk current injection (BCI)
GB/T 33014.8-2020 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 8:Immunity to magnetic fields
Related Standards
CJ/T 1-1999
Active
CJ/T 1-1999 Power supply system for urban trolleybus and tramway
CJ/T 3-1999
Active
CJ/T 3-1999 Urban trolleybus and tramway—Pole for power supply network
GB/T 18488.2-2001
Replaced
GB/T 18488.2-2001 Test procedures of the electrical machines and controllers for electric vehicles
GB/T 18488.1-2001
Replaced
GB/T 18488.1-2001 General specification of the electrical machines and controllers for electric vehicles
GB/T 18488.1-2006
Replaced