CBWQA/T 0003-2013 Active Group standards

CBWQA/T 0003-2013 Dirt separator

CBWQA/T 0003-2013 Dirt separator

Publish Date: 2013-08-01 Implement Date: 2013-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 21.00

Out of stock

Basic Information

Standard Code: CBWQA/T 0003-2013

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: The boiler and its auxiliary equipment

ICS Name: Other pipeline components

Publish Date: 2013-08-01

Implement Date: 2013-12-01

Pages: 12 pages

Scope

This standard specifies the terms and definitions, product model naming, requirements, testing methods, inspection rules, marking, packaging, transportation, and storage of spiral impurity separators (hereinafter referred to as "impurity separators").
This standard applies to impurity separators made of copper alloy, carbon steel, and stainless steel for liquid media systems with a kinematic viscosity not exceeding 40 mm2/s. The parameter range of impurity separators is as follows:
a) Flange-connected and butt-welded impurity separators with a nominal diameter not exceeding DN750, a rated temperature not exceeding 180 °C, and a nominal pressure PN not exceeding 2.5 MPa.
b) Thread-connected impurity separators with a nominal diameter not exceeding DN50, a rated temperature not exceeding 180 °C, and a nominal pressure PN not exceeding 2.5 MPa.

Development Information

Word Count: 14 Thousand words Pages: 12 pages

Referenced Standards

GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/T 3280-1992 Cold rolled stainless steel sheets and plates GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip GB/T 4237-1992 Hot rolled stainless steel sheets and plates GB/T 4237-2007 Hot rolled stainless steel plate, sheet and strip GB/T 4237-2015 Hot rolled stainless steel plate,sheet and strip GB/T 4423-1992 Wrought copper and copper alloys—Drawn rods and bars GB/T 4423-2007 Copper and copper-alloy cold-drawn rod and bar GB/T 4423-2020 Copper and copper alloy cold-drawn rod and bar GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products GB/T 5231-2012 Designation and chemical composition of wrought copper and copper alloys GB/T 5231-2022 Designation and chemical composition of wrought copper and copper alloys GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads GB/T 8163-1999 Seamless steel tubes for liquid service GB/T 8163-2008 Seamless steel tubes for liquid service GB/T 8163-2018 Seamless steel pipes for liquid service GB/T 9115-2010 Steel pipe welding neck flanges GB/T 9115.1-2000 Steel pipe welding neck flanges with flat face or raised face GB/T 9115.2-2000 Steel pipe welding neck flanges with male and female face GB/T 9115.3-2000 Steel pipe welding neck flanges with tongue and groove face GB/T 9115.4-2000 Steel pipe welding neck flanges with ring-joint face GB/T 9116-2010 Hubbed slip-on-welding steel pipe flanges GB/T 9116.1-2000 Hubbed slip-on-welding steel pipe flanges with flat face or raised face GB/T 9116.2-2000 Hubbed slip-on-welding steel pipe flanges with male and female face GB/T 9116.3-2000 Hubbed slip-on-welding steel pipe flanges with tongue and groove face GB/T 9116.4-2000 Hubbed slip-on-welding steel pipe flanges with ring-joint face GB/T 9119-2000 Slip-on-welding plate steel pipe flanges with flate face or raised face GB/T 9119-2010 Slip-on-welding plate steel pipe flanges GB/T 12225-1989 General purpose industrial valves—Specification of copper alloy castings GB/T 12225-2005 General purpose industrial valves—Specification of copper alloy castings GB/T 12225-2018 General purpose industrial valves—Specification of copper alloy castings GB/T 13402-1992 Large-diameter carbon steel pipe flanges GB/T 13402-2010 Large diameter steel pipe flanges GB/T 13402-2019 Large diameter steel pipe flanges GB/T 13927-1992 Pressure testing for general purpose valves GB/T 13927-2008 Industrial valves—Pressure testing GB/T 13927-2022 Industrial valves—Pressure testing GB/T 14976-2002 Stainless steel seamless tubes for fluid transport GB/T 14976-2012 Seamless stainless steel pipes for fluid transport GB/T 14976-2025 Seamless stainless steel pipes for fluid transport GB/T 20878-2007 Stainless and heat-resisting steels—Designation and chemical composition GB/T 20878-2024 Stainless steels—Designation and chemical composition GB/T 25053-2010 Continuously hot rolled low carbon steel sheet and strip GB/T 25053-2025 Continuously hot⁃rolled low carbon steel sheet and strip JB/T 81-2015 Sheet steel plate welding flanged steel pipe flange JB 81-1994 Convex Panel-Type Flat-Weld Steel Pipe Flanges JB/T 5300-2008 Guidelines for selecting materials for industrial valves JB/T 7928-2014 Industrial Valve Supply Requirements JB/T 7928-1999 JBT 7928-1999 General valve Supply requirements

Related Standards

GB/T 1048-1990 Replaced

GB/T 1048-1990 Nominal pressure for pipe components

Publish Date: 1990-03-26

GB/T 1047-1995 Replaced

GB/T 1047-1995 Nominal size for pipe components

Publish Date: 1995-06-15

GB/T 15700-1995 Replaced

GB/T 15700-1995 General specification for polytetrafluoroethylene bellows compensators

Publish Date: 1995-09-08

CJ/T 473-2015 Active

CJ/T 473-2015 Sealed board pipe stopper of sewer pipe for the air test

Publish Date: 2015-03-04

GB/T 17116.2-2018 Active

GB/T 17116.2-2018 Pipe supports and hangers—Part 2:Pipe attachments

Publish Date: 2018-02-06

GB/T 17116.1-2018 Active

GB/T 17116.1-2018 Pipe supports and hangers—Part 1:Technical specification

Publish Date: 2018-03-15