GB/T 11372-1989
Replaced
GB/T 19436.1-2025
Active
National standards
GB/T 19436.1-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 1:General requirements and tests
GB/T 19436.1-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 1:General requirements and tests
Price:
$ 149
Basic Information
Standard Code:
GB/T 19436.1-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Health, safety, and labor protection
ICS Name:
Integration of mechanical systems and standard parts
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Pages:
56 pages
Scope
This document specifies the general principles for the design, manufacture, and testing of electrically sensitive protective equipment (ESPE) specifically used for detecting the human body or parts of the human body, which are components of safety-related systems. It is particularly important to ensure that the appropriate safety-related performance is achieved for their functions and design requirements. ESPEs may include selective safety-related functions, the requirements for which are given in Appendix A. Note: "Non-contact" means that no human contact is required for sensing. This document is intended to be used in conjunction with subsequent parts of GB/T 19436, which are based on the special requirements of sensitive technologies. Example: This document and GB/T 19436.2 are used for active optoelectronic protective devices (AOPDs); this document and GB/T 19436.3 are used for active optoelectronic diffuse reflection protective devices (AOPDDRs). If there is no part covering sensitive technologies, IEC TS 62998-1 is used. If the GB/T 19436 series does not contain all necessary provisions, IEC TS 62998-1 is used. In addition to IEC TS 62998-1, the parts covered by the GB/T 19436 series can also be used in combination.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests
GB/T 17799.7-2022 Electromagnetic compatibility—Generic standards—Part 7:Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
GB/T 16855.2-2015 Safety of machinery—Safety-related parts of control systems—Part 2:Validation
ISO 13849-1
ISO 12100
IEC 60068-2-6
IEC 60068-2-27
IEC 60068-2-64
IEC 60417
IEC 60447
IEC 60445
IEC 60529
IEC 60721-3-5
IEC TR 60721-4-3
IEC 60947-1:2007
IEC 60947-1:2007/AMD2:2014
IEC 61000-4-3:2006
IEC 61000-4-3:2006/AMD1:2007
IEC 61000-4-3:2006/AMD2:2010
IEC 61000-4-5:2014/AMD1:2017
IEC 615808-2
IEC 61508(所有部分)
IEC 62061
Adopt standards
IEC 61496-1:2020
Related Standards
GB/T 13309-1991
Replaced
GB/T 13309-1991 Specification for mechanical vibration generator system
GB/T 13310-1991
Replaced
GB/T 13310-1991 Specification for electrodynamic vibration generator system
GB/T 13306-1991
Replaced
GB/T 13306-1991 Plates
GB/T 15755-1995
Active
GB/T 15755-1995 The calculation and selection of cone interference fits
GB/T 10943-2003
abolished_transferred