GB/T 6165-1985
Replaced
T/CAQI 64-2019
Active
Group standards
T/CAQI 64-2019 Small air duct for a new air system
T/CAQI 64-2019 Small air duct for a new air system
Price:
$ 21.00
Basic Information
Standard Code:
T/CAQI 64-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
HVAC and air conditioning equipment for buildings
ICS Name:
Ventilation and air conditioning
Publish Date:
2019-03-11
Implement Date:
2019-09-10
Pages:
24 pages
Scope
This standard specifies the terms and definitions, classification and marking, basic requirements, testing methods, inspection rules, marking, transportation, storage, etc. of air ducts used in small fresh air systems. This standard applies to ventilation and air conditioning projects in new, expanded, and renovated civil buildings that use small fresh air systems with a system air volume of no more than 2,000 m3/h. The selection of air ducts exceeding this system air volume can refer to this standard. The air ducts referred to in this standard mainly include metal air ducts and non-metallic air ducts (hereinafter referred to as air ducts).
Development Information
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.2-2008 Sampling procedures for inspection by attributes—Part 2:Sampling plans indexed by limiting quality(LQ)for isolated lot inspection
GB/T 2828.3-2008 Sampling procedures for inspection by attributes—Part 3:Skip-lot sampling procedures
GB/T 2828.4-2008 Sampling procedures for inspection by attributes—Part 4:Procedures for assessment of declared quality levels
GB/T 2828.5-2011 Sampling procedures for inspection by attributes—Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL)for lot-by-lot inspection
GB/T 2828.10-2010 Sampling procedures for inspection by attributes—Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
GB/T 2828.11-2008 Sampling procedures for inspection by attributes—Part 11:Procedures for assessment of declared quality levels for small population
GB 8624-1997 Classification on burning behaviors for building materials
GB 8624-2006 Classification for burning behavior of building materials and products
GB 8624-2012 Classification for burning behavior of building materials and products
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 9978-2008
GB/T 17428-2009 Fire resistance test methods of ventilation ducts
GB/T 18883-2002 Indoor air quality standard
GB/T 18883-2022 Standards for indoor air quality
GB 50243-2002 Code of acceptance for construction quality of ventilation and air conditioning works
GB 50243-2016 Code of acceptance for construction quality of ventilation and air conditioning works
GB 50325-2001 Code for indoor environmental pollution control of civil building engineering
GB 50325-2010 Code for indoor environmental pollution control of civil building engineering
GB 50325-2020 Standard for indoor environmental pollution control of civil building engineering
JG/T 20-1999 Method of testing for rating air distributor performance
JGJ/T 141-2004
JG/T 258-2009 Nonmetallic and foil-insulant composite duct
JG/T 258-2018 Nonmetallic and foil-insulant composite air duct
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB 8624-2025 Classification for burning behavior of building materials and products
Related Standards
GB/T 6166-1985
Replaced
GB/T 6166-1985 Methods for testing the performance of high efficiency filter media—Penetration and resistance
GB/T 6167.1-1985
Replaced
GB/T 6167.1-1985 Methods for testing the performance of dust particle counter—Calibration for sizing particle
GB/T 6167.2-1985
Replaced
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter—Particle concentration
GB/T 7725-1996
Replaced
GB/T 7725-1996 Room air conditioners
JG/T 14-1999
Replaced