NB/T 20082-2012 Qualification procedure for safety-class diesel-generator applied as standby power supplies for nuclear power plants

GB/T 755-2008 Rotating electrical machines—Rating and performance GB/T 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity GB/T 10069.3-2008 Measurement of airborne noise emitted by rotating electrical machines and the noise limits—Part 3:Noise limits GB/T 1971-2006 Rotating electrical machines—Terminal markings and direction of rotation EJ/T 1197-2007 The method and environmental conditions for quality appraisal testing of nuclear power plant safety-level electrical equipment GB/T 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity GB/T 1971-2006 Rotating electrical machines—Terminal markings and direction of rotation GB 50150-2006 GB/T 755-2008 Rotating electrical machines—Rating and performance GB/T 10069.1-2006 Measurement of the airborne noise emitted by rotating electrical machines and the noise limits—Part 1:Method for the measurement of airborne noise emitted by rotating electrical machines GB/T 10069.3-2008 Measurement of airborne noise emitted by rotating electrical machines and the noise limits—Part 3:Noise limits GB/T 1029-2005 Test procedures for three-phase synchronous machines GB/T 12727-2002 Nuclear power plants—Electrical equipment of the safety system—Qualification GB/T 13625-1992 Seismic qualification of electrical equipment of the safety system for nuclear power plants GB/T 15548-2008 General specification for three-phase synchronous generators driven by reciprocating internal combustion engine GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code) GB/T 20160-2006 Recommended practice for testing insulation resistance of rotating machinery GB/T 22718-2008 Thermal evaluation methods of insulation systems for high-voltage electrical machines GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2900.1-2008 Electrotechnical terminology—Fundamental terms GB/T 2900.25-2008 Electrotechnical terminology—Rotating electrical machines GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined(IP code)—Classification HAF J0053 JB/T 10098-2000 JB/T 5810-2007 The test specification for the insulation between the motor pole coils and the magnetic field windings JB/T 8445-1996 Test Method for the Withstand Capacity of Negative Sequence Current of Three-Phase Synchronous Generators JB/T 8446-2005 Determination Method for Inter-turn Short-circuit of Rotor of Hidden Pole Synchronous Generators JB/T 9615.1-2000 Test Method for Inter-Winding Insulation of AC Low-Voltage Motors with Embedded and Wrapped Windings NB/T 20040-2011 Nuclear power plant safety-grade electrical equipment earthquake resistance evaluation test rules