GB/T 8110-2020 Active National standards

GB/T 8110-2020 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels

GB/T 8110-2020 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels

Publish Date: 2020-11-19 Implement Date: 2021-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 66

Basic Information

Standard Code: GB/T 8110-2020

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Welding and cutting

ICS Name: Welding consumables

Publish Date: 2020-11-19

Implement Date: 2021-06-01

Pages: 17 pages

Scope

This standard specifies the model, technical requirements, test methods, re-inspection, and supply technical conditions for non-alloy steel and fine-grained steel solid welding wires used in gas-shielded arc welding.
This standard applies to non-alloy steel and fine-grained steel solid welding wires (hereinafter referred to as "welding wires") used in gas-shielded arc welding, where the minimum tensile strength of the deposited metal does not exceed 570 MPa.

Development Information

Word Count: 32 Thousand words Pages: 17 pages

Replace the following standards

GB/T 8110-2008 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel

Referenced Standards

GB/T 37910.1-2019 Non-destructive testing of welds—Acceptance levels for radiographic testing—Part 1:Steel,nickel, titanium and their alloys GB/T 39255-2020 Gases and gas mixtures for welding and cutting processes GB/T 2650-1989 Method of impact test for welded joint GB/T 2650-2008 Impact test methods on welded joints GB/T 2650-2022 Destructive tests on welds in metallic materials—Impact tests GB/T 2652-1989 Method of tensile tests for weld and deposited metal GB/T 2652-2008 Tensile test methods on weld and deposited metal GB/T 2652-2022 Destructive tests on welds in metallic materials—Longitudinal tensile test on weld metal in fusion welded joints GB/T 3323.1-2019 Non-destructive testing of welds—Radiographic testing—Part 1:X-and gamma-ray techniques with film GB/T 18591-2001 Welding—Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature GB/T 25774.1-2010 Test methods for welding consumables—Part 1:Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys GB/T 25774.1-2023 Test methods for welding consumables—Part 1:Preparation of deposited metal test pieces and specimens for mechanical properties in steel,nickel and nickel alloys GB/T 25775-2010 Technical delivery conditions for welding consumables—Type of product,dimensions,tolerances and markings GB/T 25778-2010 Procurement guidelines for welding consumables

Adopt standards

ISO 14341:2010

Related Standards

GB/T 3731-1983 Abolished

GB/T 3731-1983 Covered electrodes—Determination of the efficiency, metal recovery and deposition coefficient

Publish Date: 1983-06-21

GB/T 8454-1987 Replaced

GB/T 8454-1987 Determination of ferrous iron content in reduced ilmenite powder for welding rod

Publish Date: 1987-12-25

GB/T 11364-1989 Replaced

GB/T 11364-1989 Test method of spread-ability and clearance filling ability for filler metal

Publish Date: 1989-05-08

GB/T 13679-1992 Replaced

GB/T 13679-1992 Manganese base brazing filler metals

Publish Date: 1992-09-22

GB/T 13814-1992 Replaced

GB/T 13814-1992 Nickel and nickel alloy covered welding electrodes

Publish Date: 1992-11-05

GB/T 13815-1992 Replaced

GB/T 13815-1992 Aluminium base brazing filler metals

Publish Date: 1992-11-05