GB/T 3731-1983
Abolished
GB/T 8110-2008
Replaced
National standards
GB/T 8110-2008 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel
GB/T 8110-2008 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel
Basic Information
Standard Code:
GB/T 8110-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Welding and cutting
ICS Name:
Welding consumables
Publish Date:
2008-06-26
Implement Date:
2009-01-01
Pages:
25 pages
Scope
This standard specifies the classification and models, technical requirements, test methods, inspection rules, packaging, marking, and quality certificates of carbon steel and low-alloy steel solid welding wires and filler wires used in gas shielded arc welding. This standard applies to carbon steel and low-alloy steel solid welding wires and filler wires (hereinafter referred to as welding wires) used in welding processes such as gas shielded arc welding, tungsten gas shielded arc welding, and plasma arc welding.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 223.41-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
GB/T 223.42-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-brom opyrogallol red photometric method for the determination of tantalum content
GB/T 223.43-1994 Methods for chemical analysis of iron, steel and alloy—Determination of tungsten content
GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method
GB/T 223.45-1994 Methods for chemical analysis of iron, steel and alloy—The cupral separation-xylidyl blue Ⅱphotometric method for the determination of magnesium content
GB/T 223.46-1989 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of magnesium content
GB/T 223.47-1994 Methods for chemical analysis of iron, steel and alloy—The carrier precipitation-molybdenum blue potometric method for the determination of antimony content
GB/T 223.48-1985 Methods for chemical analysis of iron, steel and alloy—The semixylenol orange photometric method for the determination of bismuth content
GB/T 223.49-1994 Methods for chemical analysis of iron, steel and alloy—Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare tarth content
GB/T 223.50-1994 Methods for chemical analysis of iron, steel and alloy—The phenylfluorone-CTMAB direct photometric method for the determination of tin content
GB/T 223.51-1987 Methods for chemical analysis of iron,steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
GB/T 223.52-1987 Methods for chemical analysis of iron,steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
GB/T 223.53-1987 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.54-1987 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrophotometric method for the determination of nickel content
GB/T 223.54-2022 Iron,steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method
GB/T 223.55-2008 Iron,steel and alloy—Determination of tellurium content—Oscillo-polarographic method
GB 223.57-1989 The method of chemical analysis for steel and alloys: Extraction separation-adsorption catalytic polarography for the determination of cadmium
GB/T 223.58-1987 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60-1997 Methods for chemical analysis of iron,steel and alloy—The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.60-2024 Iron,steel and alloy—Determination of silicon content—Gravimetric method
GB/T 223.61-1988 Methods for chemical analysis of iron,steel and alloy—The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62-1988 Methods for chemical analysis of iron,steel and alloy—The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content
GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method
GB/T 223.64-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method forthe determination of manganese content
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.65-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method for the determination of cobalt content
GB/T 223.65-2012 Steel,iron and alloy—Determination of cobalt content—Flame atomic absorption spectrometric method
GB/T 223.66-1989 Methods for chemical analysis of iron, steel and alloy—The thiocyanate chlorpromazine hydrochloride—chloro form extraction photometric method for the determination of tungsten content
GB/T 223.67-1989 Methods for chemical analysis of iron, steel and alloy—The reducing distillation-methylene blue photometric method for the determination of sulfur content
GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method
GB/T 223.68-1997 Methods for chemical analysis of iron,steel and alloy The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69-1997 Methods for chemical analysis of iron,steel and alloy The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace
GB/T 223.70-1989 Methods for chemical analysis of iron, steel and alloy—The o-phenanthroline spectrophotometric method for the determination of iron content
GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method
GB/T 223.71-1997 Methods for chemical analysis of iron,steel and alloy—The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72-1991 Methods for chemical analysis of iron, steel and alloy—The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content
GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method
GB/T 223.73-1991 Methods for chemical analysis of iron, steel and alloy—The titanium trichloride-potassium dichromate volumetric method for the determination of iron content
GB/T 223.73-2008 Iron,steel and alloy—Determination of iron contents—Titanium trichloride-potassium dichromate titration method
GB/T 223.74-1997 Methods for chemical analysis of iron,steel and alloy—The combustion gravimetric/gas-volumetric method for the determination of combined carbon content
GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.77-1994 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of calcium content
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 2650-1989 Method of impact test for welded joint
GB/T 2650-2008 Impact test methods on welded joints
GB/T 2650-2022 Destructive tests on welds in metallic materials—Impact tests
GB/T 2652-1989 Method of tensile tests for weld and deposited metal
GB/T 2652-2008 Tensile test methods on weld and deposited metal
GB/T 2652-2022 Destructive tests on welds in metallic materials—Longitudinal tensile test on weld metal in fusion welded joints
GB/T 3323-2005 Radiographic examination of fusion welded joints in metallic materials
GB/T 3965-1995 Methods for determination of diffusible hydrogen in deposited metal
GB/T 3965-2012 Determination of diffusible hydrogen in deposited metal
Adopt standards
AWS A5.18M:2005
AWS A5.28M:2005
Related Standards
GB/T 8454-1987
Replaced
GB/T 8454-1987 Determination of ferrous iron content in reduced ilmenite powder for welding rod
GB/T 11364-1989
Replaced
GB/T 11364-1989 Test method of spread-ability and clearance filling ability for filler metal
GB/T 13679-1992
Replaced
GB/T 13679-1992 Manganese base brazing filler metals
GB/T 13814-1992
Replaced
GB/T 13814-1992 Nickel and nickel alloy covered welding electrodes
GB/T 13815-1992
Replaced