GB/T 6492-1986
Replaced
T/CEMIA 018-2019
Active
Group standards
T/CEMIA 018-2019 Photovoltaic multicrystalline silicon uses fused quartz ceramic crucible
T/CEMIA 018-2019 Photovoltaic multicrystalline silicon uses fused quartz ceramic crucible
Price:
$ 24.00
Basic Information
Standard Code:
T/CEMIA 018-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Solar energy
ICS Name:
Solar energy engineering
Publish Date:
2019-08-01
Implement Date:
2019-11-01
Pages:
16 pages
Scope
This standard specifies the terms and definitions, specifications, marking, technical requirements, test methods, inspection rules, and packaging, marking, transportation, and storage of fused quartz ceramic crucibles used in photovoltaic polysilicon production. This standard applies to crucibles (hereinafter referred to as "crucibles") made from fused quartz or quartz glass using injection-casting or injection-molding processes, which are used in photovoltaic polysilicon casting furnaces to load polysilicon raw materials, perform casting, and conduct melting and purification.
Development Information
Referenced Standards
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2997-2000 Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products
GB/T 2997-2015 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
GB/T 3001-2000 Shaped refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3001-2007 Refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3001-2017 Refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3284-1993 Analytical method of the chemical composition in the quartz glass
GB/T 3284-2015 Analytical method of the chemical composition in the quartz glass
GB/T 5072-2008 Refractories—Determination of cold compressive strength
GB/T 5072-2023 Refractory products—Determination of cold compressive strength
GB/T 5072.1-1998 Dense, shaped refractory products—Determination of cold compressive strength—Part 1:Referee test without packing
GB/T 5072.2-2004 Dense shaped refractory products—Determination of cold compressive strength—Part 2:Test with packing
GB/T 5990-2006 Refractory materials—Determination of thermal conductivity—Hot-wire method
GB/T 5990-2021 Refractory materials—Determination of thermal conductivity,specific heat capacity and thermal diffusivity(hot-wire method)
GB/T 7320-2008 Refractories—Determination of thermal expansion
GB/T 7320-2018 Refractories—Determination of thermal expansion
GB/T 7320.1-2000 Refractory materials—Determination of thermal expansion—Push rod method
GB/T 7320.2-2000 Refractory materials—Determination of thermal expansion(Telescope method)
JC/T 2067-2011 Solar energy polycrystalline silicon uses fused quartz ceramic crucible
JC/T 2205-2014 Quartz glass terminology
JY/T 009-1996 General rules for X-ray polycrystalline diffractometry
Related Standards
GB/T 6494-1986
Replaced
GB/T 6494-1986 Measurement procedures for electrical characteristics of astronautic solar cells
GB/T 6496-1986
Replaced
GB/T 6496-1986 The general rules of astronautic solar cell calibration
GB/T 6497-1986
Active
GB/T 6497-1986 The general rules of terrestrial solar cell calibration
GB/T 12632-1990
Abolished
GB/T 12632-1990 General specification of single silicon solar cells
GB/T 12915-1991
Abolished