GB 19510.10-2004
Replaced
GB/T 24823-2024
Active
National standards
GB/T 24823-2024 LED modules for general lighting—Performance specification
GB/T 24823-2024 LED modules for general lighting—Performance specification
Basic Information
Standard Code:
GB/T 24823-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric light source products
ICS Name:
Other standards related to lighting
Publish Date:
2024-11-28
Implement Date:
2025-06-01
Pages:
40 pages
Scope
This document specifies the performance requirements for LED modules, as well as the test methods and test conditions for verifying their compliance.
This document applies to the following types of LED modules (see Figure 1):
—— Type 1: Integrated LED modules powered by a DC power supply of 250 V or less, or an AC power supply of 1,000 V or less at 50 Hz or 60 Hz;
—— Type 2: (Semi-integrated) LED modules that operate under the control of a control device connected to mains voltage and include a control device within the module to operate at constant voltage, constant current, or constant power;
—— Type 3: LED modules in which all control devices used to control the module to operate at constant voltage, constant current, or constant power are independent of the module (non-integrated).
Development Information
Replace the following standards
Referenced Standards
GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature
GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature
GB/T 2424.5-2006 Environmental tests for electric and electronic products—Confirmation of the performance of temperature chambers
GB/T 2424.5-2021 Environmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of temperature chambers
GB/T 2900.65-2004 Electrotechnical terminology—Lighting
GB/T 2900.65-2023 Electrotechnical terminology—Lighting
GB 7000.1-2002 General safety requirements and tests for luminaires
GB 7000.1-2007 Luminaires—Part 1:General requirements and tests
GB 7000.1-2015 Luminaires—Part 1:General requirements and tests
GB/T 7000.1-2023 Luminaires—Part 1:General requirements and tests
GB/T 19510.213-2023 Controlgear for electric light sources—Part 2-13:Particular requirements for d.c.or a.c. supplied electronic controlgear for LED modules
GB/T 19658-2005 Method of measurement of center beam intensity and beam angle(s) of reflector lamps
GB/T 19658-2013 Method of measurement of center beam intensity and beam angle(s) of reflector lamps
GB 24819-2009 LED modules for general lighting—Safety specifications
GB/T 24819-2023 LED modules for general lighting—Safety specifications
GB/T 24825-2009 DC or AC supplied electronic control gear for LED modules—Performance requirements
GB/T 24825-2022 DC or AC supplied electronic controlgear for LED modules—Performance specifications
GB/T 24826-2009 Terms and definitions of LEDs and LED modules for general lighting
GB/T 24826-2016 General lighting-Light emitting diode(LED) products and related equipment—Terms and definitions
GB/T 39394-2020 Test method for LED lamps,LED luminaires and LED modules
ANSI/IES LM-80-15
Adopt standards
IEC 62717:2019
Related Standards
GB 19510.11-2004
Replaced
GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)
GB 19510.1-2004
Replaced
GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements
GB 19510.3-2004
Replaced
GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps
GB 19510.9-2004
Replaced
GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps
GB 19510.12-2005
Replaced