GB/T 36993-2018 Active National standards

GB/T 36993-2018 Ring groove rivet assemblies—Specifications

GB/T 36993-2018 Ring groove rivet assemblies—Specifications

Publish Date: 2018-12-28 Implement Date: 2019-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 36993-2018

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: \nRivets

Publish Date: 2018-12-28

Implement Date: 2019-07-01

Pages: 18 pages

Scope

This standard specifies the mechanical properties, technical requirements, test methods, marking methods, and acceptance and packaging of ring groove rivets, sleeve rings, and riveted joints made from carbon steel or alloy steel when tested at an ambient temperature of 10℃ to 35℃. Note: The applicable use temperature of ring groove rivets produced according to this standard is -50℃ to +150℃. When the use temperature exceeds -50℃ to +150℃, users need to consult relevant parties. This standard applies to ring groove rivet joints for drawing rivet fastening connections. The ring groove rivet joints applicable to this standard include: -- Type I made from carbon steel or alloy steel with a performance grade of 5.8R and a nominal diameter of 5 mm to 10 mm; a performance grade of 8.8R and a nominal diameter of 12 mm to 35 mm; -- Type I made from alloy steel with a performance grade of 10.9R and a nominal diameter of 12 mm to 36 mm; -- Type II made from carbon steel or alloy steel with a nominal diameter of 5 mm to 20 mm.

Development Information

Word Count: 33 Thousand words Pages: 18 pages

Referenced Standards

GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 5267.1-2002 Fasteners—Electroplated coatings GB/T 5267.1-2023 Fasteners—Electroplate coating GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.3-2008 Fasteners—Hot dip galvanized coatings GB/T 5779.1-2000 Fasteners—Surface discontinuities—Bolts,screws and studs for general requirements GB/T 5779.2-2000 Fasteners—Surface discontinuities—Nuts GB/T 11376-1997 Phosphate conversion coatings for metals GB/T 11376-2020 Metallic and other inorganic coatings—Phosphate conversion coating of metals GB/T 15519-2002 Chemical conversion coatings—Black oxide coating on iron and steel—Specification and test methods GB/T 16825.1-2002 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system GB/T 16825.1-2008 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Calibration and verification of the force-measuring system

Related Standards

GB/T 12617-1990 Replaced

GB/T 12617-1990 120 deg flush head break mandrel blind rivets

Publish Date: 1990-12-14

GB/T 12618-1990 Replaced

GB/T 12618-1990 Mushroom head break mandrel blind rivets

Publish Date: 1990-12-14

GB/T 12619-1990 Replaced

GB/T 12619-1990 Specifications for break mandrel blind rivets

Publish Date: 1990-12-14

GB/T 18194-2000 Active

GB/T 18194-2000 Rivet shank diameters

Publish Date: 2000-09-26

GB/T 12615.1-2004 Active

GB/T 12615.1-2004 Closed end blind rivets with break pull mandrel and protruding head—Property class 11

Publish Date: 2004-02-10

GB/T 12615.2-2004 Active

GB/T 12615.2-2004 Closed end blind rivets with break pull mandrel and protruding head—Property class 30

Publish Date: 2004-02-10