GB 6675.2-2025 Pending National standards force_standard

GB 6675.2-2025 Safety of toys—Part 2:Mechanical and physical properties

GB 6675.2-2025 Safety of toys—Part 2:Mechanical and physical properties

Publish Date: 2025-10-05 Implement Date: 2026-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 6675.2-2025
Standard Type: National standards
Standard Status: Pending
is_force_gb: yes
CCS Name: Toy
ICS Name: Toy
Publish Date: 2025-10-05
Implement Date: 2026-11-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 中华人民共和国工业和信息化部
Pages: 140 pages

Scope

本文件规定了可接受的玩具结构特征的要求,包括形状、尺寸、轮廓、间隙(如摇铃玩具、小零件、锐利尖端、锐利边缘、铰链等)及某些玩具性能的参数要求(非弹性顶端的弹射物的最大动能、某些乘骑玩具的最小倾倒角等)。
本文件规定了从新生婴儿至14岁儿童使用的不同年龄组玩具的要求及测试方法。这些要求随玩具所对应不同年龄组而不同。特定年龄组儿童使用的玩具的要求是根据危险的特性及儿童应对的智力和体力而制定的。
注1: 见附录A玩具年龄分级指南,更详细的年龄段划分见GB/T 28022。
本文件还规定了在某些玩具本体或其包装上给出合适的警示和/或使用说明。附录B列出了警示及使用说明的基本内容。
本文件适用于所有玩具,即设计或明显预定供14岁以下儿童在玩耍中使用的任何产品。本文件适用于消费者首次得到的玩具,也适用于经过合理的、可预见的正常使用和滥用测试后的玩具,除非另有特别声明。
本文件不能覆盖各类玩具或特定玩具可能存在的全部潜在危险。本文件对于玩具固有的、众所周知的,而且与玩具功能密不可分的危险特性,除要求标示功能性危险及玩具适用的年龄范围外,不作其他要求。
注2: 这种危险的一个例子是针的正常功能所必需的锐利尖端。玩具缝纫套装的购买者非常了解针的危险,使用者在购买时通过产品包装上的警示标识和在学习缝纫的正常教育过程中了解到功能性锐利尖端的危险。
注3: 两轮玩具滑板车具有与其使用相关的固有和众所周知的危险(如使用过程中的不稳定性,尤其是对于初学者而言)。符合本文件要求,会使与结构特性相关的潜在危险(锐利边缘、夹伤等)降至最低。
下列产品不适用于本文件。
a)鞍座最大高度大于435 mm的自行车(见E.1)。
b)投石器/弹弓。
注4: 弹弓也被称为投石器,通常手持使用,见图1。

Development Information

Word Count: 250 Thousand words Pages: 140 pages

Same series standard

Replace the following standards

Referenced Standards

GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 3505-2000 Geometrical product specifications (GPS)—Surface texture:Profile method—Terms, definitions and surface texture parameters GB/T 3505-2009 Geometrical Product Specifications (GPS)—Surface texture:Profile method—Terms,definitions and surface texture parameters GB/T 3785.1-2010 Electroacoustics—Sound level meters—Part 1:Specifications GB/T 3785.1-2023 Electroacoustics—Sound level meters—Part 1:Specifications GB/T 6672-2001 Plastics film and sheeting—Determination of thickness by mechanical scanning GB/T 17248.2-1999 Acoustics—Noise emitted by machinery and equipment—Measurement of emission sound pressure levels at a work station and at other specified positions—Engineering method in an essentially free field over a reflecting plane GB/T 17248.2-2018 Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections GB/T 17248.3-1999 Acoustics—Noise emitted by machinery and equipment—Measurement of emission sound pressure levels at a work station and at other specified positions—Survey method in situ GB/T 17248.3-2018 Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections

Adopt standards

ISO 8124-1:2022

Related Standards

Contact Us