GB/T 21956.2-2015 Replaced National standards

GB/T 21956.2-2015 Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2:Dynamic testing method of front mounted ROPS

GB/T 21956.2-2015 Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2:Dynamic testing method of front mounted ROPS

Publish Date: 2015-12-10 Implement Date: 2016-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 21956.2-2015

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: The driver's cab and other parts of the vehicle are separated by a partition wall.

ICS Name: Agricultural tractors and traction vehicles

Publish Date: 2015-12-10

Implement Date: 2016-07-01

Pages: 48 pages

Scope

This part of GB/T 21956 specifies the dynamic test methods and acceptance conditions for the strength of front-mounted protective devices on narrow-track wheeled tractors used in agriculture and forestry.
This part applies to pneumatic tire tractors with two axles, where the ground clearance between the lowest points of the front and rear axles does not exceed 600 mm; tractors with a minimum wheelbase of not more than 1,150 mm, regardless of whether the front or rear wheels are equipped with maximum-sized tires; and tractors with a unladen mass (including protective devices and the maximum tires provided by the manufacturer) of more than 400 kg but less than 3,500 kg. The mass ratio should not exceed 1.75. The maximum operating mass should not exceed 5,250 kg.

Development Information

Word Count: 86 Thousand words Pages: 48 pages

Same series standard

GB/T 21956.1-2015 Protective structure strength on narrow-track wheeled agricultural andforestry tractors—Testing method and acceptance condition—Part 1:Static testing method of front mounted ROPS GB/T 21956.3-2015 Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3:Static testing method of rear mounted ROPS

Replace the following standards

GB/T 21956.2-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors Part 2:Dynamic testing method of front mounted ROPS

Superseded by the following standards

GB/T 21956.1-2024 Tractors for agriculture and forestry—Roll-over protective structures on narrow tractors—Part 1:Front-mounted ROPS

Referenced Standards

GB/T 6960.1-2007 Tractor terminology—Part 1:Complete tractor GB/T 6960.7-2007 Tractor terminology—Part 7:Cab, seat and sheet metal GB/T 700-1988 Carbon structural steels GB/T 700-2006 Carbon structural steels GB/T 6236-2008 Tractors and machinery for agricultural and forestry—Seat index point

Adopt standards

OECD code 6:2012

Related Standards

GB/T 5262-1985 Replaced

GB/T 5262-1985 Measuring methods for agricultural machinery testing conditions—general rules

Publish Date: 1985-07-25

GB 7121-1986 Replaced

GB 7121-1986 Agricultural and forestry wheeled tractors—Protective structures—Test method in the strength and acceptance conditions

Publish Date: 1986-12-30

GB 1593.4-1987 Abolished

GB 1593.4-1987 Agricultural wheeled tractors—Three-point linkage—Part 4:Category 0

Publish Date: 1987-01-02

GB/T 13875-1992 Replaced

GB/T 13875-1992 The general specification for walking tractors

Publish Date: 1992-11-14

GB/T 13876-1992 Replaced

GB/T 13876-1992 Agricultural wheeled tractors—Evaluation criteria of whole body vibration of the operator

Publish Date: 1992-11-14

GB/T 13878-1992 Abolished

GB/T 13878-1992 Agricultural tractors and self-propelled machines—Performance of heating and ventilation systems in closed cabs—Method of test

Publish Date: 1992-11-14