GB/T 2521-1996
Replaced
GB/T 32286.1-2015
Replaced
National standards
GB/T 32286.1-2015 Soft magnetic alloys—Part 1: Nickel-iron alloys
GB/T 32286.1-2015 Soft magnetic alloys—Part 1: Nickel-iron alloys
Basic Information
Standard Code:
GB/T 32286.1-2015
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Precision alloys
ICS Name:
Special magnetic steel
Publish Date:
2015-12-10
Implement Date:
2016-11-01
Pages:
40 pages
Scope
This part of GB/T 32286 specifies the classification, order content, dimensions, shape, technical requirements, test methods, inspection rules, packaging, marking, and quality certificates of iron-nickel soft magnetic alloy materials. This part applies to cold-rolled strips, cold-drawn wires, cold-drawn (rolled) tubes, hot-rolled (forged) rods, and flat materials of iron-nickel alloys with high magnetic permeability such as 1J46, 1J50, and 1J54; cold-rolled plates of iron-nickel alloys with high magnetic permeability such as 1J76, 1J77, 1J79, 1J80, and 1J85; cold-rolled strips of iron-nickel square magnetic alloys such as 1J34, 1J51, 1J52, 1J65, 1J67, 1J83, and 1J403; cold-rolled strips of magnetic temperature compensation iron-nickel alloys such as 1J30, 1J31, 1J32, 1J33, and 1J38; and cold-rolled strips of constant magnetic permeability iron-nickel alloys such as 1J66. This part does not apply to high-hardness, high-resistance, and high-magnetic permeability iron-nickel alloy materials, corrosion-resistant iron-nickel alloy materials, and iron-nickel alloy materials for magnetic heads (hereinafter referred to as alloy materials).
Development Information
Superseded by the following standards
Referenced Standards
GB/T 222-2006 Permissible tolerances for chemical composition of steel products
GB/T 14986-2008 High saturation magnetic induction,magnetic compensate alloys depending on temperature variation,corrosion-resisting,iron-aluminium,Permanent permeability,soft magneticalloys
GB/T 223.8-2000 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation—EDTA titration method for the determination of aluminium content
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content
GB/T 223.25-1994 Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60-1997 Methods for chemical analysis of iron,steel and alloy—The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.60-2024 Iron,steel and alloy—Determination of silicon content—Gravimetric method
GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content
GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 3658-1990 Soft magnetic alloys—Measuring method for alternative magnetic properties
GB/T 3658-2008 Methods of measurement of a.c.magnetic properties of magnetically soft materials
GB/T 3658-2022 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
GB/T 13012-1991 Solid steels—Methods of measurement of the d.c. magnetic properties
GB/T 13012-2008 Methods of measurement of d.c.magnetic properties of magnetically soft materials
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20125-2006 Low-alloy steel—Determination of multi-element contents—Inductively coupled plasma atomic emission spectrometric method
YB/T 5242-2013 General regulations for packaging, labeling, and quality certificate of precision alloys
GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
Related Standards
GB/T 17951.2-2002
Replaced
GB/T 17951.2-2002 Cold-rolled grain non-oriented electrical steel strip (sheet) delivered in the semi-processed state
GB/T 19345-2003
Replaced
GB/T 19345-2003 Amorphous and nanocrystalline soft magnetic alloy strips
GB/T 911-2004
Replaced
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 2521-2008
Active
GB/T 2521-2008 Cold-rolled grain-oriented and non-oriented electrical steel strip(sheet)
GB/T 6983-2008
Replaced