FZ/T 34001-2003
Replaced
FZ/T 95018-2012
Active
Industry standards-Textiles
FZ/T 95018-2012 Machines for shrinkage by controlled compression
FZ/T 95018-2012 Machines for shrinkage by controlled compression
Basic Information
Standard Code:
FZ/T 95018-2012
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Dyeing and finishing machinery and equipment
ICS Name:
Dyeing and finishing machinery and equipment
Publish Date:
2012-12-28
Implement Date:
2013-06-01
Pages:
7 pages
Scope
This standard specifies the classification and parameters, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of pre-shrinking finishing machines.
This standard applies to pre-shrinking finishing machines for cotton and its blended fabrics, which enable the fabrics to achieve a predetermined shrinkage rate, improve dimensional stability, and enhance wearing performance.
Development Information
Referenced Standards
GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB 150-1998 Steel pressure vessels
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB 2894-1996 Safety signs
GB 2894-2008 Safety signs and guideline for the use
GB/T 7111.1-2002 Textile machinery—Noise test code—Part 1:Common requirements
GB/T 7111.7-2002 Textile machinery—Noise test code—Part 7:Dyeing and finishing machinery
GB/T 17780.1-2012 Textile machinery—Safety requirements—Part 1:Common requirements
GB/T 17780.7-2012 Textile machinery—Safety requirements—Part 7:Dyeing and finishing machinery
GB/T 22801-2009 Textile machinery—Guide rollers for dyeing and finishing machinery—Main dimensions and working performance requirements
FZ/T 90001-2006 Product package of textile machinery
FZ/T 90074-2004 Painting for the products of textile machinery
FZ/T 90074-2021 Painting for the products of textile machinery
FZ/T 90089.1-1996 Text of the nameplate, specifications, and technical requirements for textile machinery
FZ/T 90089.1-2021 Textile machinery nameplate—Part 1:Types,dimensions and specifications
FZ/T 90089.2-1996 Textile machinery nameplate content
FZ/T 90089.2-2021 Textile machinery nameplate—Part 2:Information
FZ/T 92065-2006 Stainless steel welding cylinder
FZ 92065-2006 Stainless steel welded baking drum
HG/T 2013-2001 Rubber roll part 3: Fabric pre-shrink rubber blanket
FZ 90001-1991 Textile machinery product packaging
GB 2894-2025 Safety colours and safety signs
TSG R0004-2009 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets
Related Standards
FZ/T 34004-2003
Replaced
FZ/T 34004-2003 Polyester/ramie printed and dyed fabrics
GB/T 20037-2005
Active
GB/T 20037-2005 Textile machinery—Dyeing and finishing machines—Definition of left and right sides
GB/T 20038-2005
Active
GB/T 20038-2005 Textile machinery—Dyeing and finishing machines—Definitions and range of nominal widths
GB/T 6002.12-2005
Active
GB/T 6002.12-2005 Textile machinery terminology—Part 12:Dyeing,finishing and allied Machinery—Classification and nomenclature
GB/T 6002.13-2005
Active