GB/T 150.4-2011 Replaced National standards

GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance

GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance

Publish Date: 2011-11-21 Implement Date: 2012-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 150.4-2011

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Pressure vessel

ICS Name: Pressure vessels, gas cylinders

Publish Date: 2011-11-21

Implement Date: 2012-03-01

Pages: 32 pages

Scope

1.1 This part specifies the manufacturing, inspection, and acceptance requirements for steel pressure vessels within the scope of application of GB 150; the manufacturing, inspection, and acceptance requirements for pressure vessels made of other materials shall be in accordance with relevant standards.
1.2 The pressure vessel structures applicable to this part include single-layer welded pressure vessels, forged-welded pressure vessels, and multi-layer pressure vessels (including multi-layer cylinder section wrapping, multi-layer integral wrapping, steel strip cross-winding, and sleeve-type vessels).
1.3 For low-temperature pressure vessels made of austenitic steel (with a design temperature below –196°C), the additional manufacturing, inspection, and acceptance requirements shall be determined through consultation among all parties involved in the construction and specified by the design unit in the design documents.

Development Information

Word Count: 52 Thousand words Pages: 32 pages

Same series standard

GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design

Replace the following standards

GB 150-1998 Steel pressure vessels

Superseded by the following standards

GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance

Referenced Standards

GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB 150.3-2001 GB/T 196-2003 General purpose metric screw threads—Basic dimensions GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 197-2018 General purpose metric screw threads—Tolerances GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB/T 25198-2010 Heads for pressure vessels GB/T 25198-2023 Heads for pressure vessels GB/T 21433-2008 Detecting susceptibility to intergranular corrosion in stainless steel pressure vessels JB/T 4700 JB/T 4701 JB 4702-1992 JB 4702-1992 Type B Flat Welded Flange JB/T 4703 JB/T 4704 JB/T 4705 JB 4706-1992 Metal liner gasket/Metal lining bushing JB/T 4707 NB/T 47014-2023 Pressure equipment welding process qualification NB/T 47015-2023 Stress vessel welding procedure JB/T 4711-2003 Coating and packing for pressure vessels transport JB/T 4730.1 JB/T 4730.2 JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing JB/T 4730.6-2005 Nondestructive testing of pressure equipments—Part 6:Eddy current testing JB/T 4736 NB/T 47016-2023 The mechanical properties of welded specimens for pressure equipment products are tested NB/T 47018.1(JB/T 4747.1) NB/T 47018.2(JB/T 4747.2) NB/T 47018.3(JB/T 4747.3) NB/T 47018.4(JB/T 4747.4) NB/T 47018.5(JB/T 4747.5) GB/T 196-2025 General purpose metric screw threads—Basic dimensions TSG R0004-2009 Supervision Regulation on Safety Technology for Stationary Pressure Vessel

Related Standards

GB/T 6058-1985 Replaced

GB/T 6058-1985 Method for preparation and internal pressure testing of filamentwound pressure vessels

Publish Date: 1985-05-28

GB 12136-1989 Abolished

GB 12136-1989 Arrester for dissolved acetylene cylinders

Publish Date: 1989-12-29

GB/T 13003-1991 Replaced

GB/T 13003-1991 Method for pneumatic test of dissolved acetylene cylinders

Publish Date: 1991-04-03

GB/T 13005-1991 Replaced

GB/T 13005-1991 Terminology of gas cylinders

Publish Date: 1991-04-30

GB 13076-1991 Replaced

GB 13076-1991 Periodic inspection and evaluation of dissolved acetylene cylinders

Publish Date: 1991-07-12

GB 13077-1991 Replaced

GB 13077-1991 Periodic inspection and evaluation of seamless aluminium alloy gas cylinders

Publish Date: 1991-07-12