GB/T 6058-1985
Replaced
GB/T 150.4-2024
Active
National standards
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
Basic Information
Standard Code:
GB/T 150.4-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Pressure vessel
ICS Name:
Pressure vessels, gas cylinders
Publish Date:
2024-07-24
Implement Date:
2025-02-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国锅炉压力容器标准化技术委员会(SAC/TC 262)
Pages:
68 pages
Scope
本文件规定了钢制压力容器的制造、检验和验收要求。
本文件适用于钢制压力容器以及复合板压力容器、衬里压力容器、带堆焊层压力容器中非合金钢、低合金钢或高合金钢制基层的制造、检验和验收。
本文件适用的压力容器结构形式为单层焊接（含管制筒体)压力容器、锻焊压力容器、套合压力容器、多层包扎（包括多层筒节包扎、多层整体包扎)压力容器和钢带错绕压力容器。
Development Information
Drafting Units:
合肥通用机械研究院有限公司、中国机械工业集团有限公司、中国特种设备检测研究院、二重(德阳)重型装备有限公司、大连金州重型机器集团有限公司、一重集团大连工程技术有限公司、浙江大学、江苏省特种设备安全监督检验研究院、中石化南京化工机械有限公司、中国石化工程建设有限公司、兰州兰石重型装备股份有限公司
Drafting Persons:
崔军、陈学东、李军、王迎君、徐锋、刘静、范志超、孙亮、赵景玉、陈志伟、姚佐权、陈志平、缪春生、阎长周、韩冰、段瑞、郑晖、郑逸翔、陈建玉、房务农、贾小斌、陈永东、元少昀
Same series standard
Replace the following standards
Referenced Standards
NB/T 10558-2021 Pressure vessel coating and transportation packaging
NB/T 11025
NB/T 11270-2023 Titanium Pressure Vessel
NB/T 47002.1-2019 Stress-resistant composite plate for pressure vessels - Part 1: Stainless steel-steel composite plate
NB/T 47002.2-2019 Composite plates for pressure vessels - Part 2: Nickel-steel composite plates
NB/T 47002.3-2019 Pressure vessel composite plate - Part 3: Titanium-steel composite plate
NB/T 47002.4-2019 NB/T 47002.4-2019 Composite plates for pressure vessels - Part 4: Copper-steel composite plates
NB/T 47008-2017 Carbon steel and alloy steel forgings used in pressure equipment
NB/T 47008-2010 Carbon and alloy steel forgings for pressure equipments
NB/T 47009-2017 Low-temperature pressure-bearing equipment alloy steel for forging
NB/T 47009-2010 Low-alloy steel forgings for low temperature pressure equipments
NB/T 47011
NB/T 47013.1-2015 Non-destructive testing of pressure equipment - Part 1: General requirements
NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing
NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing"
NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing
NB/T 47013.6-2015 Non-destructive testing of pressure equipment - Part 6: Eddy current testing
NB/T 47013.7-2012 Nondestructive testing of pressure equipments-Part 7:Visual examination
NB/T 47013.8-2012 Nondestructive testing of pressure equipments-Part 8:Leak Testing
NB/T 47013.8-2025 Non-destructive testing of pressure equipment - Part 8: Leakage testing
NB/T 47013.9-2012 Nondestructive testing of pressure equipments-Part 9:Acoustic emission testing
NB/T 47013.10-2015 Non-destructive testing of pressure equipment - Part 10: Ultrasonic testing using time-of-flight diffraction method
NB/T 47013.10-2010 Nondestructive testing of pressure equipments-Part 10:Ultrasonic time of flight diffraction technique
NB/T 47013.11-2023 Non-destructive testing of pressure equipment - Part 11: Digital imaging detection using X-ray technology
NB/T 47013.11-2015 Non-destructive testing of pressure equipment - Part 11: X-ray digital imaging testing
NB/T 47013.12-2015 Non-destructive testing of pressure equipment - Part 12: Magnetic flux leakage testing
NB/T 47013.13-2015 Non-destructive testing of pressure equipment - Part 13: Impulse eddy current testing
NB/T 47013.14-2023 Non-destructive testing of pressure equipment - Part 14: X-ray computer-aided imaging inspection
NB/T 47013.14-2016 Non-destructive testing of pressure equipment - Part 14: X-ray computer-aided imaging detection
NB/T 47013.15-2021 NB/T 47013.15-2021 Nondestructive testing for pressure equipment - Part 15: Phased array ultrasonic testing
NB/T 47013.16-2024 NB/T 47013.16-2024 Nondestructive testing of pressure equipment Part 16: Infrared thermal imaging testing
NB/T 47013.17-2024 NB/T 47013.17-2024 Nondestructive testing for pressure equipment - Part 17: Magnetic-memory testing
NB/T 47013.18-2024 NB/T 47013.18-2024 Nondestructive testing for pressure equipment - Part 18: Array eddy current testing
NB/T 47013.21-2025 Non-destructive testing of pressure equipment - Part 21: Detection using alternating electromagnetic fields
NB/T 47014-2023 Pressure equipment welding process qualification
NB/T 47015-2023 Stress vessel welding procedure
NB/T 47016-2023 The mechanical properties of welded specimens for pressure equipment products are tested
NB/T 47018.1-2017 Welding Material for Pressure Equipment Ordering Technical Specification Part 1: Purchase General Rules
NB/T 47018.1-2011 Technical permission of welding materials for pressure equipment Section 1:General rule
NB/T 47018.2-2017 The technical requirements for ordering welding materials for pressure equipment Part 2: Steel welding rods
NB/T 47018.2-2011 Technical permission of welding materials for pressure equipment Section 2:Electrodes for steel
NB/T 47018.3-2017 Specifications for Welding Materials for Pressure Equipment - Part 3: Gas-protected Electric Arc Welding Wire and Filler Wire
NB/T 47018.3-2011 Technical permission of welding materials for pressure equipment Section 3:Steel electrodes and rods for gas shielded arc welding
NB/T 47018.4-2017 Specification for Welding Materials for Pressure Equipment Part 4: Filler Steel Welding Wire and Welding Solder for Submerged-Arc Welding
NB/T 47018.4-2011 Technical permission of welding materials for pressure equipment Section 4:Electrodes and fluxes for submerged arc welding
NB/T 47018.5-2017 "Specifications for welding materials used in pressure equipment - Part 5: Stainless steel welding strips and welding fluxes for overlay welding"
NB/T 47018.5-2011 Technical permission of welding materials for pressure equipment Section 5:Stainless steel strip electrodes and fluxes for overlay welding
NB/T 47018.6-2011 Technical permission of welding materials for pressure equipment Section 6:Bare aluminum and aluminum-alloy welding electrodes and rods
NB/T 47018.7-2011 Technical permission of welding materials for pressure equipment Section 7:Titanium and titanium-alloy welding electrodes and rods
NB/T 47019.4-2021 Order Specification for Low Alloy Steel Tubes for Boilers and Heat Exchangers - Part 4: Low Temperature Application for Low Alloy Steel Tubes
NB/T 47019.4-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 4:Low alloy steel for low-temperature service
NB/T 47020
NB/T 47021
NB/T 47022
NB/T 47023
NB/T 47024
NB/T 47025
NB/T 47026
NB/T 47027-2012 Stud bolts & nuts for body flange
NB/T 47041-2014 tower container
NB/T 47042-2014 Horizontal container
NB/T 47065.1-2018 Container supports Part 1: Saddle supports
NB/T 47065.2-2018 Container supports Part 2: Leg supports
NB/T 47065.3-2018 Container supports Part 3: Ear type supports
NB/T 47065.4-2018 Container supports Part 4: Supporting supports
NB/T 47065.5-2018 Container supports Part 5: Rigid ring supports
Related Standards
GB 12136-1989
Abolished
GB 12136-1989 Arrester for dissolved acetylene cylinders
GB/T 13003-1991
Replaced
GB/T 13003-1991 Method for pneumatic test of dissolved acetylene cylinders
GB/T 13005-1991
Replaced
GB/T 13005-1991 Terminology of gas cylinders
GB 13076-1991
Replaced
GB 13076-1991 Periodic inspection and evaluation of dissolved acetylene cylinders
GB 13077-1991
Replaced