GB/T 6970-1986
Replaced
GB/T 26882.2-2024
Active
National standards
GB/T 26882.2-2024 Grain and oil storage—Monitoring and control system of stored-graincondition—Part 2:Slave computer
GB/T 26882.2-2024 Grain and oil storage—Monitoring and control system of stored-graincondition—Part 2:Slave computer
Basic Information
Standard Code:
GB/T 26882.2-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Integrated food and feed crops
ICS Name:
Buildings and equipment for the processing and storage of agricultural products
Publish Date:
2024-11-28
Implement Date:
2025-06-01
Pages:
16 pages
Scope
This document specifies the model numbering and classification, technical requirements, inspection rules, and marking, packaging, transportation, and storage of grain condition monitoring and control system terminals, and describes the testing methods for grain condition monitoring and control system terminals.
This document is applicable to grain condition monitoring and control system terminals used in grain and oil storage.
Development Information
Same series standard
GB/T 26882.1-2024 Grain and oil storage—Monitoring and control system of stored-grain condition—Part 1:General rule
GB/T 26882.3-2024 Grain and oil storage—Monitoring and control system of stored-grain condition—Part 3:Software
GB/T 26882.4-2024 Grain and oil storage—Monitoring and control system of stored-grain condition—Part 4:Information exchange interface protocol
Replace the following standards
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 3482-2008 Lightning test method for electronic equipments
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 4793.1-1995 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1:General requirements
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1:General requirements
GB/T 4798.1-2019 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 1:Storage
GB/T 4798.2-1996 Environmental conditions existing in the application of electric and electronic products—Transportation
GB/T 4798.2-2008 Environmental conditions existing in the application of electric and electronic products—Part 2:Transportation
GB/T 4798.2-2021 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 2:Transportation and handling
GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles
GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB/T 6587-2012 General specification for electronic measuring instruments
GB/T 10111-1988 Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 Generation of random numbers and procedures applied to sampling inspection for product quality
GB/T 11463
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 26882.1-2024 Grain and oil storage—Monitoring and control system of stored-grain condition—Part 1:General rule
GB/T 26882.4-2011 Grain and oil storage—Monitoring and control system of stored-grain condition—Part 4:Agreement of information exchange interface
GB/T 26882.4-2024 Grain and oil storage—Monitoring and control system of stored-grain condition—Part 4:Information exchange interface protocol
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 6971-1986
Replaced
GB/T 6971-1986 Test method for feed mills
GB/T 12994-1991
Replaced
GB/T 12994-1991 Seed processing machinery—Terminology
GB/T 17237-1998
Replaced
GB/T 17237-1998 The general technical conditions for animal slaughtering
GB/T 17913-1999
Replaced
GB/T 17913-1999 Phosphine recirculation equipment for grain storages
NY/T 647-2002
Active