GB/T 20485.22-2008 Active National standards

GB/T 20485.22-2008 Methods for the calibration of vibration and shock transducers—Part 22:Shock calibration by comparison to a reference transducer

Publish Date: 2008-03-03 Implement Date: 2008-08-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 20485.22-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Vibration, impact, and vibration measurement

Publish Date: 2008-03-03

Implement Date: 2008-08-01

Pages: 21 pages

Scope

This section specifies the methods of measuring the reference acceleration, velocity, or force over time, and the instrumentation and operating procedures for impact comparison calibration of linear accelerometers. This method is suitable for impact pulses with a duration range of 1) 0.05 ms to 8.0 ms, and a dynamic range (peak value) of 100 m/s2 to 100 km/s2 (related to the pulse duration). These methods can obtain the impact sensitivity of the sensor (that is, the relationship between the peak value of the acceleration sensor output and the peak value of the acceleration). These methods are not used for the calibration of dynamic force sensors used in modal analysis.

Development Information

Word Count: 38 Thousand words Pages: 21 pages

Same series standard

GB/T 20485.1-2008 Methods for the calibration of vibration and shock transducers—Part 1:Basic concepts GB/T 20485.12-2008 Method for the calibration of vibration and shock transducers—Part 12:Primary vibration calibration by the reciprocity method

Replace the following standards

GB/T 13823.10-1995 Methods for the calibration of vibration and shock pick-ups—Secondary shock calibration

Referenced Standards

GB/T 20485.1-2008 Methods for the calibration of vibration and shock transducers—Part 1:Basic concepts GB/T 20485.11-2006 Methods for the calibration of vibration and shock transducers—Part 11:Primary vibration calibration by laser interferometry GB/T 20485.12-2008 Method for the calibration of vibration and shock transducers—Part 12:Primary vibration calibration by the reciprocity method GB/T 20485.13-2007 Methods for the calibration of vibration and shock transducers—Part 13:Primary shock calibration by laser interferometry GB/T 20485.21-2007 Methods for the calibration of vibration and shock transducers—Part 21:Vibration calibration by comparison to a reference transducer ISO 5347-22 ISO 18431-2 GB/T 2298-1991 Mechanical vibration and shock—Terminology GB/T 2298-2010 Mechanical vibration,shock and condition monitoring—Vocabulary

Adopt standards

ISO 16063-22:2005

Related Standards

GB/T 4451-1984 Abolished

GB/T 4451-1984 Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument

Publish Date: 1984-06-03

GB/T 6383-1986 Replaced

GB/T 6383-1986 The method of vibration cavitation erosion test

Publish Date: 1986-05-13

GB/T 7184-1987 Replaced

GB/T 7184-1987 Measurement method of vibration for small and medium power diesel engines

Publish Date: 1987-01-12

GB/T 7183-1987 Abolished

GB/T 7183-1987 Evaluation of mechanical vibration severity of machines and equipments in electric locomotives

Publish Date: 1987-01-16

GB/T 8540-1987 Replaced

GB/T 8540-1987 Vibration and shock—Isolators—Procedure for specifying characteristics

Publish Date: 1987-12-30

GB/T 10084-1988 Abolished

GB/T 10084-1988 Vibration and shock—methods for analysis and presentation of data

Publish Date: 1988-12-10