GB/T 10216-1998
Replaced
GB/T 31034-2024
Active
National standards
GB/T 31034-2024 Insulating back sheet for crystalline silicon photovoltaic(PV) modules
GB/T 31034-2024 Insulating back sheet for crystalline silicon photovoltaic(PV) modules
Basic Information
Standard Code:
GB/T 31034-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrician's insulating materials and their products
ICS Name:
Other insulating materials
Publish Date:
2024-09-29
Implement Date:
2025-04-01
Pages:
20 pages
Scope
This document specifies the classification, requirements, inspection rules, marking, packaging, transportation, and storage of insulated backplanes used in crystalline silicon solar cell modules, and describes the corresponding test methods.
This document is applicable to insulated backplanes used in crystalline silicon solar cell modules (hereinafter referred to as "backplanes").
Development Information
Replace the following standards
Referenced Standards
GB/T 1408.1-2016 Insulating materials—Test methods for electric strength—Part 1:Test at power frequencies
GB/T 2410-2008 Determination of the luminous transmittance and haze of transparent plastics
GB/T 3979-2008 Methods for the measurement of object color
GB/T 4207-2021
GB/T 5591.2-2017 Combined flexible materials for electrical insulation—Part 2:Methods of test
GB/T 8808-1988
GB/T 13542.2-2021 Plastic films for electrical purposes—Part 2:Methods of test
GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests
GB/T 23989-2009 Determination for the solvent resistance of coatings by solvent rubs
IEC 61215-2:2021
IEC 61730-1:2023
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist
GB/T 2790-1995 Adhesives, 180° peel strength test method for a flexible-bonded-to-rigid test specimen assembly
GB/T 2900.5-2002 Electrotechnical terminology—Insulating solids, liquids and gases
GB/T 2900.5-2013 Electrotechnical terminology—Electrical insulating solids,liquids and gases
GB/T 7921-1997 Uniform color space and color difference formula
GB/T 7921-2008 Uniform color space and color difference formula
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance—Part 1:Ageing procedures and evaluation of test results
GB/T 11026.1-2016 Electrical insulating materials—Thermal endurance properties—Part 1:Ageing procedures and evaluation of test results
GB/T 21529-2008 Determination of water vapour transmission rate for plastic film and sheeting—Electrolytic detection sensor method
GB/T 23988-2009 Determination for abrasion resistance of coatings by falling abrasive
GB/T 26253-2010 Determination of water vapour transmission rate for plastics-film and sheeting—Infrared detection sensor method
GB/T 31838.2-2019 Solid insulating materials—Dielectric and resistive properties—Part 2:Resistive properties(DC methods)—Volume resistance and volume resistivity
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 1303.1-1998
Replaced
GB/T 1303.1-1998 Epoxide woven glass fabric laminated sheet
GB/T 5022-1998
Replaced
GB/T 5022-1998 Specification for rigid mica materials for heating equipment
GB/T 4207-2003
Replaced
GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
GB/T 6553-2003
Replaced
GB/T 6553-2003 Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
GB/T 10064-2006
Replaced