GB/T 5625.1-1985
Replaced
GB/T 19228.3-2003
Replaced
National standards
GB/T 19228.3-2003 O-rings for stainless steel press-fittings
GB/T 19228.3-2003 O-rings for stainless steel press-fittings
Basic Information
Standard Code:
GB/T 19228.3-2003
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Piping accessories
ICS Name:
Flanges, pipe joints, and connectors
Publish Date:
2003-07-10
Implement Date:
2003-12-01
Pages:
7 pages
Scope
This section specifies the types and sizes of rubber O-ring seals (hereinafter referred to as seals) for stainless steel compression fittings, as well as their technical requirements, testing and inspection methods, marking, packaging, and storage and transportation procedures.
Development Information
Same series standard
Superseded by the following standards
Referenced Standards
生活饮用水输配水设备及防护材料卫生安全评价规范(卫生部卫法监发(2001)161号文附件2)
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 531-1999 Rubber—Determination of indentation hardness by means of pocket hardness meters
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 531.2-2009 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 2:IRHD pocket meter method
GB/T 1685-1982 Rubber, vulcanized—Determination of stress relaxation in compression at normal and at elevated temperature
GB/T 1685-2008 Rubber,vulcanized or thermoplastic—Determination of stress relaxation in compression at ambient and at elevated temperatures
GB/T 1685.2-2019 Rubber,vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2:Testing with temperature cycling
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 5720-1993 Test methods for rubber O rings
GB/T 5720-2008 Test methods for rubber O-rings
GB/T 5721-1993 General rules of identification, packaging, transportation and storage for rubber sealing products
GB/T 7759-1996 Rubber, Vulcanized or thermoplastic—Determination of compression set at ambient elevated or low temperatures
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 7759.2-2014 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 2:At low temperatures
GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test
GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing
GB/T 12829-2006 Rubber,vulcanized or thermoplastic—Determination of tear strength of small test pieces (Delft test pieces)
HG/T 3092-1988 Material of rubber seals used for gas supply pipes and fittings
Related Standards
GB/T 5625.2-1985
Replaced
GB/T 5625.2-1985 Flared type tube fittings—Straight thread connector—Body
GB/T 5626.1-1985
Replaced
GB/T 5626.1-1985 Flared type tube fittings—Male connector—Assembly
GB/T 5626.2-1985
Replaced
GB/T 5626.2-1985 Flared type tube fittings—Male connector—Body
GB/T 5627.1-1985
Replaced
GB/T 5627.1-1985 Flared typed tube fittings—Straight thread long connector—Assembly
GB/T 5627.2-1985
Replaced