GB/T 12008.2-2010 Active National standards

GB/T 12008.2-2010 Plastics—Polyether polyols—Part 2:Specification

GB/T 12008.2-2010 Plastics—Polyether polyols—Part 2:Specification

Publish Date: 2010-09-26 Implement Date: 2011-08-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 12008.2-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Synthetic resins and plastics

ICS Name: Plastic

Publish Date: 2010-09-26

Implement Date: 2011-08-01

Pages: 9 pages

Scope

This part of GB/T 12008 specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, and storage for polyether polyols 113E, 210, 220, 220X, 330E, 348H, 330, 330X, 360H, 310, 403, 6305, and 8305.
This part applies to polyether polyols 113E, 210, 220, 220X, 330E, 348H, 330, 330X, 360H, 310, 403, 6305, and 8305 that are produced by ring-opening polymerization of polyols with propylene oxide, (or) polyols with propylene oxide and ethylene oxide under the action of a catalyst.

Development Information

Word Count: 16 Thousand words Pages: 9 pages

Same series standard

GB/T 12008.5-2010 Plastics—Polyether polyols—Part 5:Determination of acidity as acid number GB/T 12008.6-2010 Plastics—Polyether polyols—Part 6:Determination of degree of unsaturation GB/T 12008.7-2010 Plastics—Polyether polyols—Part 7:Determination of viscosity

Replace the following standards

GB/T 12008.2-1989 Polyether polyols—Specification

Referenced Standards

GB/T 605-2006 Chemical reagent—General method for the measurement of colour GB/T 6678-2003 General principles for sampling chemical products GB/T 6680-2003 General rules for sampling liquid chemical products GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods GB/T 12008.1-2009 Plastics—Polyether polyols—Part 1:Designation system GB/T 12008.3-2009 Plastics—Polyether polyols—Part 3:Determination of hydroxyl number GB/T 12008.4-2009 Plastics—Polyether polyols—Part 4:Determination of sodium and potassium GB/T 12008.5-2010 Plastics—Polyether polyols—Part 5:Determination of acidity as acid number GB/T 12008.6-2010 Plastics—Polyether polyols—Part 6:Determination of degree of unsaturation GB/T 12008.7-2010 Plastics—Polyether polyols—Part 7:Determination of viscosity GB/T 22295-2008 Standard test method for color of transparent liquids(Gardner color scale) GB/T 22313-2008 Plastics—Polyols for use in the production of polyurethan—Determination of water content

Related Standards

GB/T 2410-1980 Replaced

GB/T 2410-1980 Transparent plastics—Transmissivity and haze test

Publish Date: 1980-12-31

GB/T 2411-1980 Replaced

GB/T 2411-1980 Plastics—Shore hardness test

Publish Date: 1980-12-31

GB/T 2412-1980 Replaced

GB/T 2412-1980 Polypropylene—Method of determination of normal indices

Publish Date: 1980-12-31

GB/T 2547-1981 Replaced

GB/T 2547-1981 Plastic resins—Sampling

Publish Date: 1981-03-28

GB/T 2895-1982 Replaced

GB/T 2895-1982 Determination for acid value of unsaturated polyester resins

Publish Date: 1982-02-08

GB/T 2913-1982 Active

GB/T 2913-1982 Test for whiteness of plastics

Publish Date: 1982-03-02