GB/T 9065.5-2010 Active National standards

GB/T 9065.5-2010 Connections for hydraulic fluid power and general use—Hose fittings—Part 5:Hose fittings with 37° degree flared ends

Publish Date: 2010-09-26 Implement Date: 2011-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 9065.5-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Hydraulic and pneumatic devices

ICS Name: Pipes and pipe fittings

Publish Date: 2010-09-26

Implement Date: 2011-02-01

Pages: 12 pages

Scope

This part of GB/T 9065 specifies the basic requirements and dimensional requirements for hose connectors made of carbon steel, with nominal hose sizes conforming to GB/T 2351 in the range of 6.3 mm to 51 mm, and featuring an ISO 84342 37° flared end.
〖HT5”SS〗 Note: If other materials are selected, this shall be subject to negotiation between the supplier and the buyer.

Development Information

Word Count: 20 Thousand words Pages: 12 pages

Same series standard

GB/T 9065.2-2010 Connections for hydraulic fluid power and general use—Hose fittings—Part 2:Hose fittings with 24°cone connector ends

Replace the following standards

GB/T 9065.1-1988

Referenced Standards

GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts ISO 68-2 ISO 263 ISO 6149-1 ISO 8434-2 ISO 19879 GB/T 196-2003 General purpose metric screw threads—Basic dimensions GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 197-2018 General purpose metric screw threads—Tolerances GB/T 2351-1993 Fluid power systems and components—Connectors and associated components—Outside diameters of tubes and inside diameters of hoses GB/T 2351-2005 Fluid power systems and components—Connectors and associated components—Nominal outside diameters of tubes and nominal inside diameters of hoses GB/T 2351-2021 Fluid power systems and components—Outside diameters of tubes and inside diameters of hoses GB/T 7939-2008 Hydraulic fluid power—Hose assemblies—Test methods GB/T 7939.1-2024 Connections for hydraulic fluid power—Test methods—Part 1:Connectors GB/T 7939.2-2024 Connections for hydraulic fluid power—Test methods—Part 2:Quick-action couplings GB/T 7939.3-2023 Connections for hydraulic fluid power—Test methods—Part 3:Hose assemblies GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 17446-1998 Fluid power systems and components—Vocabulary GB/T 17446-2012 Fluid power systems and components—Vocabulary GB/T 17446-2024 Fluid power systems and components—Vocabulary GB/T 3-1997 Run-outs，undercuts and chamfers forgeneral purpose metric screw threads GB/T 196-2025 General purpose metric screw threads—Basic dimensions

Adopt standards

ISO 12151-5:2007

Related Standards

GB/Z 18427-2001 Active

GB/Z 18427-2001 Hydraulic hose assemblies—External leakage classification for hydraulic systems

Publish Date: 2001-08-28

GB/T 7937-2002 Replaced

GB/T 7937-2002 Fluid power systems and components—Connectors and associated components—Nominal pressures

Publish Date: 2002-03-10

GB/T 15329.1-2003 Replaced

GB/T 15329.1-2003 Rubber hoses and hose assemblies—Textile-reinforced hydraulic types—Specification—Part 1:Oil-based fluid applications

Publish Date: 2003-06-23

GB/T 5860-2003 Active

GB/T 5860-2003 Hydraulic fluid power—Quick-action couplings Dimensions and requirements

Publish Date: 2003-11-10

GB/T 5861-2003 Active

GB/T 5861-2003 Hydraulic fluid power—Quick action couplings—Test methods

Publish Date: 2003-11-10

GB/T 7937-2008 Abolished

GB/T 7937-2008 Fluid power systems and components—Connectors and associated components—Nominal pressures

Publish Date: 2008-01-14