GB/T 9065.2-2010 Replaced National standards

GB/T 9065.2-2010 Connections for hydraulic fluid power and general use—Hose fittings—Part 2:Hose fittings with 24°cone connector ends

GB/T 9065.2-2010 Connections for hydraulic fluid power and general use—Hose fittings—Part 2:Hose fittings with 24°cone connector ends

Publish Date: 2010-09-26 Implement Date: 2011-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 9065.2-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Hydraulic and pneumatic devices

ICS Name: Pipes and pipe fittings

Publish Date: 2010-09-26

Implement Date: 2011-02-01

Pages: 16 pages

Scope

This part of GB/T 9065 specifies the basic design and performance requirements and dimensional requirements for hose fittings with a 24° conical connection end (in accordance with ISO 8434-1 and ISO 8434-4), which are made of carbon steel and used with hoses with a nominal inner diameter of 5 mm to 38 mm.
Note: If other materials are selected, this shall be subject to negotiation between the supplier and the buyer.
The hose fittings specified in this part (see Figure 1) are used in hydraulic systems together with hoses that meet the requirements of different hose standards.

Development Information

Word Count: 20 Thousand words Pages: 16 pages

Same series standard

GB/T 9065.5-2010 Connections for hydraulic fluid power and general use—Hose fittings—Part 5:Hose fittings with 37° degree flared ends

Replace the following standards

GB/T 9065.2-1988

Superseded by the following standards

GB/T 9065.2-2025 Connections for hydraulic fluid power—Hose fittings—Part 2:24° cone connectors

Referenced Standards

GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts ISO 8434-1 ISO 8434-4 ISO 19879 GB/T 196-2003 General purpose metric screw threads—Basic dimensions GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 197-2018 General purpose metric screw threads—Tolerances GB/T 2351-1993 Fluid power systems and components—Connectors and associated components—Outside diameters of tubes and inside diameters of hoses GB/T 2351-2005 Fluid power systems and components—Connectors and associated components—Nominal outside diameters of tubes and nominal inside diameters of hoses GB/T 2351-2021 Fluid power systems and components—Outside diameters of tubes and inside diameters of hoses GB/T 7939-2008 Hydraulic fluid power—Hose assemblies—Test methods GB/T 7939.1-2024 Connections for hydraulic fluid power—Test methods—Part 1:Connectors GB/T 7939.2-2024 Connections for hydraulic fluid power—Test methods—Part 2:Quick-action couplings GB/T 7939.3-2023 Connections for hydraulic fluid power—Test methods—Part 3:Hose assemblies GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 17446-1998 Fluid power systems and components—Vocabulary GB/T 17446-2012 Fluid power systems and components—Vocabulary GB/T 17446-2024 Fluid power systems and components—Vocabulary GB/T 3-1997 Run-outs，undercuts and chamfers forgeneral purpose metric screw threads GB/T 196-2025 General purpose metric screw threads—Basic dimensions

Adopt standards

ISO 12151-2:2003

Related Standards

GB/Z 18427-2001 Active

GB/Z 18427-2001 Hydraulic hose assemblies—External leakage classification for hydraulic systems

Publish Date: 2001-08-28

GB/T 7937-2002 Replaced

GB/T 7937-2002 Fluid power systems and components—Connectors and associated components—Nominal pressures

Publish Date: 2002-03-10

GB/T 15329.1-2003 Replaced

GB/T 15329.1-2003 Rubber hoses and hose assemblies—Textile-reinforced hydraulic types—Specification—Part 1:Oil-based fluid applications

Publish Date: 2003-06-23

GB/T 5860-2003 Active

GB/T 5860-2003 Hydraulic fluid power—Quick-action couplings Dimensions and requirements

Publish Date: 2003-11-10

GB/T 5861-2003 Active

GB/T 5861-2003 Hydraulic fluid power—Quick action couplings—Test methods

Publish Date: 2003-11-10

GB/T 7937-2008 Abolished

GB/T 7937-2008 Fluid power systems and components—Connectors and associated components—Nominal pressures

Publish Date: 2008-01-14