中文 English
GB 22380.2-2010 Replaced National standards force_standard

GB 22380.2-2010 Explosion protected safety technique of the petrol filling station—Part 2:Safety requirements for construction and performance of safe breaks for use on dispensers

GB 22380.2-2010 Explosion protected safety technique of the petrol filling station—Part 2:Safety requirements for construction and performance of safe breaks for use on dispensers

Publish Date: 2010-11-10 Implement Date: 2011-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 22380.2-2010
Standard Type: National standards
Standard Status: Replaced
is_force_gb: yes
CCS Name: Explosion-proof electrical appliances
ICS Name: Electric equipment for use in explosive environments
Publish Date: 2010-11-10
Implement Date: 2011-09-01
Pages: 13 pages

Scope

This part specifies the safety requirements for the structure and performance of safety relief valves used in fuel dispensers installed in gas stations to add liquid fuel to vehicles, ships, light aircraft, or mobile tank containers at a flow rate of no more than 200 L/min (hereinafter referred to as "fuel dispensers").
This part applies to safety relief valves used in fuel dispensers installed in gas stations to add liquid fuel to vehicles, ships, light aircraft, or mobile tank containers at a flow rate of no more than 200 L/min.
This part pays particular attention to the electrical, mechanical, and hydraulic performance of safety relief valves, as well as the electrical equipment installed inside or outside safety relief valves.
This part mainly addresses the risk of ignition of liquid fuel or its vapors during refueling. This part also addresses electrical and non-electrical hazards.
Note: The liquid fuel described in this part does not include liquefied petroleum gas (LPG).

Development Information

Word Count: 20 Thousand words Pages: 13 pages

Same series standard

GB 22380.3-2010 Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves

Superseded by the following standards

GB/T 22380.2-2019 Explosion protected safety technique of the petrol filling station—Part 2:Safety requirements for construction and performance of safe breaks for use on dispensers

Referenced Standards

GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements GB/T 9572-2001 Rubber and plastics hoses and hose assemblies—Determination of electrical resistance GB 22380.1-2008 Explosion protected safety technique of the petrol filling station—Part 1:Explosion protected safety technique requirements for fuel filling dispenser GB 25285.1-2010 Explosive atmospheres—Explosion prevention and protection—Part 1:Basic concepts and methodology GB 25286.1-2010 Non-electrical equipment for explosive atmospheres—Part 1:Basic method and requirements ISO 11925-3 EN 13483:2005 GB/T 193-2003 General purpose metric screw threads—General plan GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads GB/T 9145-2003 General purpose metric screw threads—Limits of sizes for the screw threads of medium quality and preferable plan GB 10543-2003 Rubber hose and hose assemblies for aircraft ground fuelling and defuelling GB/T 10543-2014 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling—Specification GB 17930-1999 Unleaded petrol(gasoline)for motor vehicles GB 17930-2006 Gasoline for motor vehicles GB 17930-2011 Gasoline for motor vehicles GB 17930-2013 Gasoline for motor vehicles GB 17930-2016 Gasoline for motor vehicles GB 18351-2001 Ethanol gasoline for motor vehicles GB 18351-2004 Ethanol gasoline for motor vehicles GB 18351-2010 Ethanol gasoline for motor vehicles(E10) GB 18351-2013 Ethanol gasoline for motor vehicles(E10) GB 18351-2015 Ethanol gasoline for motor vehicles(E10） GB 18351-2017 Ethanol gasoline for motor vehicles (E10) GB 18351-2025 Ethanol gasoline for motor vehicles

Related Standards

GB 5590-1985 Replaced

GB 5590-1985 Mining type flameproof electric magnetic starters

Publish Date: 1985-11-20
GB 3836.9-1990 Replaced

GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"

Publish Date: 1990-08-27
GB 3836.11-1991 Replaced

GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap

Publish Date: 1991-05-27
GB 3836.12-1991 Replaced

GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

Publish Date: 1991-05-27
GB 3836.13-1997 Replaced

GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres

Publish Date: 1997-12-30
MT 703-1997 Replaced

MT 703-1997 Technical condition of electro-chemical type carbon monoxide instrumentation for coal mine

Publish Date: 1997-12-30
Contact Us