GB 22380.3-2010 Replaced National standards force_standard

GB 22380.3-2010 Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves

Publish Date: 2010-11-10 Implement Date: 2011-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 22380.3-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: yes

CCS Name: Explosion-proof electrical appliances

ICS Name: Electric equipment for use in explosive environments

Publish Date: 2010-11-10

Implement Date: 2011-09-01

Pages: 13 pages

Scope

This part specifies the safety and environmental requirements for the structure and performance of shear valves used in fuel dispensers installed in gas stations to refuel vehicles, ships, light aircraft, or mobile tank containers with a flow rate not exceeding 200 L/min (hereinafter referred to as "fuel dispensers").
This part applies to shear valves used in fuel dispensers installed in gas stations to refuel vehicles, ships, light aircraft, or mobile tank containers with a flow rate not exceeding 200 L/min.
This part pays particular attention to mechanical and hydraulic performance.
Note: The liquid fuels described in this part do not contain liquefied petroleum gas (LPG).

Development Information

Word Count: 18 Thousand words Pages: 13 pages

Same series standard

GB 22380.2-2010 Explosion protected safety technique of the petrol filling station—Part 2:Safety requirements for construction and performance of safe breaks for use on dispensers

Superseded by the following standards

GB/T 22380.3-2019 Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves

Referenced Standards

GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads GB 17930-2006 Gasoline for motor vehicles GB 18351-2004 Ethanol gasoline for motor vehicles GB 22380.1-2008 Explosion protected safety technique of the petrol filling station—Part 1:Explosion protected safety technique requirements for fuel filling dispenser GB 25285.1-2010 Explosive atmospheres—Explosion prevention and protection—Part 1:Basic concepts and methodology GB 25286.1-2010 Non-electrical equipment for explosive atmospheres—Part 1:Basic method and requirements GB/T 5464-1999 Non-combustibility test method of building materials GB/T 5464-2010 Non-combustibility test method for building materials GB/T 5464-2026 Non-combustibility test method for building materials

Related Standards

GB 5590-1985 Replaced

GB 5590-1985 Mining type flameproof electric magnetic starters

Publish Date: 1985-11-20

GB 3836.9-1990 Replaced

GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"

Publish Date: 1990-08-27

GB 3836.11-1991 Replaced

GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap

Publish Date: 1991-05-27

GB 3836.12-1991 Replaced

GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

Publish Date: 1991-05-27

GB 3836.13-1997 Replaced

GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres

Publish Date: 1997-12-30

MT 703-1997 Replaced

MT 703-1997 Technical condition of electro-chemical type carbon monoxide instrumentation for coal mine

Publish Date: 1997-12-30