GB/T 20174-2019 Active National standards

GB/T 20174-2019 Petroleum drilling and production equipment—Drill-through equipment

GB/T 20174-2019 Petroleum drilling and production equipment—Drill-through equipment

Publish Date: 2019-03-25 Implement Date: 2019-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 297

Basic Information

Standard Code: GB/T 20174-2019

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Oil drilling and extraction equipment and instruments

ICS Name: Exploration and drilling equipment

Publish Date: 2019-03-25

Implement Date: 2019-10-01

Pages: 123 pages

Scope

This standard specifies the design, materials, welding, quality control, marking, storage, and transportation requirements for drilling equipment used in oil and gas wells.
This standard applies to the following equipment:
a) Gate valve blowout preventers;
b) Gate valves, gate valve rubber seals, and top seals;
c) Annular blowout preventers;
d) Annular blowout preventer sealing rubber seals;
e) Integrated blowout preventers;
f) Hydraulic connectors (wellhead devices, risers, or LMRPs);
g) Drilling cross-connections and positioning jumpers;
h) Conversion joints;
i) Core rods;
j) Single-piece connections;
k) Clamps.
Dimensional interchangeability is limited to end and outlet connections only.
Typical equipment mentioned in this standard is shown in Figures 1, 2, and 3.
This standard does not apply to the on-site use and field testing of drilling equipment.

Development Information

Word Count: 234 Thousand words Pages: 123 pages

Replace the following standards

GB/T 20174-2006 Petroleum and natural gas industries—Drilling and production equipment—Drill-through equipment

Referenced Standards

GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 20972.1-2007 Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 1:General principles for selection of cracking resistant materials GB/T 20972.2-2008 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons GB/T 20972.2-2025 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons GB/T 20972.3-2008 Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 3:Cracking-resistant CRAs(corrosion-resistant alloys)and other alloys GB/T 20972.3-2025 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 3:Cracking-resistant CRAs(corrosion-resistant alloys) and other alloys GB/T 22513-2008 Petroleum and natural gas industries—Drilling and production equipment—Wellhead and christmas tree equipment GB/T 22513-2013 Petroleum and natural gas industries—Drilling and production equipment—Wellhead and christmas tree equipment GB/T 22513-2023 Petroleum and natural gas drilling and production equipment—Wellhead and tree equipment ISO 9712 API Spec 5CT API Spec 5DP API 6AF2 API 6X API Spec 16A API Spec 20E API Spec 20F API Spec Q1 ASME　锅炉及压力容器规范　第Ⅱ卷C篇:焊条、焊丝及填充金属 ASME　锅炉及压力容器规范　第Ⅴ卷:材料和制造用超声检验方法 ASME　锅炉及压力容器规范　第Ⅷ卷　第1册:压力容器建造规则 ASME　锅炉及压力容器规范　第Ⅷ卷　第2册:压力容器建造另一规则 ASME　锅炉及压力容器规范　第Ⅸ卷:焊接钎焊评定 ASTM SI 10 ASTM A 370 ASTM A 388 ASTM D 395 ASTM D 412 ASTM D 471 ASTM D 1414 ASTM D 1415 ASTM D 1418 ASTM D 2240 ASTM E 94 ASTM E 140 ASTM E 165 ASTM E 428 ASTM E 569 ASTM E 709 ASTM E 747 ASNT-SNT-TC-1A AWS D17.1/D17.1M SAE AMS 2750E

Related Standards

GB/T 9253.9-1995 Abolished

GB/T 9253.9-1995 Drill pipe thread gauges

Publish Date: 1995-05-15

GB/T 9253.8-1995 Abolished

GB/T 9253.8-1995 Drill pipe threads

Publish Date: 1995-05-22

GB/T 16750.1-1997 Replaced

GB/T 16750.1-1997 The types, general parameters and conjunction sizes of electrical submersible pumping equipment

Publish Date: 1997-03-04

GB/T 16750.2-1997 Replaced

GB/T 16750.2-1997 Electrical submersible pump—Technical specifications

Publish Date: 1997-03-04

GB/T 16750.3-1997 Replaced

GB/T 16750.3-1997 The test method for electrical submersible pump units

Publish Date: 1997-03-04

GB/T 17386-1998 Replaced

GB/T 17386-1998 Recommended practice for sizing and selection of electric submersible pump installations

Publish Date: 1998-05-18