YY/T 0158-2013 Abolished Industry standards-Medicine

YY/T 0158-2013 Gasket ring on pressure steam sterilizer

YY/T 0158-2013 Gasket ring on pressure steam sterilizer

Publish Date: 2013-10-21 Implement Date: 2014-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY/T 0158-2013

Standard Type: Industry standards

Standard Status: Abolished

is_force_gb: no

CCS Name: Public medical equipment

ICS Name: Other standards related to disinfection and sterilization

Publish Date: 2013-10-21

Implement Date: 2014-10-01

Pages: 6 pages

Scope

This standard specifies the classification, requirements, test methods, inspection rules, marking and user's manual, as well as packaging, transportation, and storage of sealing gaskets for pressure steam sterilization equipment.
This standard applies to sealing gaskets for pressure steam sterilization equipment (hereinafter referred to as "sealing gaskets") with a design pressure not exceeding 0.4 MPa and a design temperature within the range of 115℃ to 150℃.

Development Information

Word Count: 10 Thousand words Pages: 6 pages

Replace the following standards

YY/T 0158-2005 Spring type gasket on pressure steam sterilizer

Referenced Standards

GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness) GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method GB/T 9969-2008 General principles for preparation of instructions for use of industrial products GB 9969.1-1998 General principles for preparation of instructions for use of industrial products HG/T 2198-2011 The general requirements for physical testing methods of vulcanized rubber HG/T 2198-1991 The general requirements for physical testing methods of vulcanized rubber GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)

Related Standards

YY 0154-2005 Replaced

YY 0154-2005 Spring type safety valve on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0157-2005 Replaced

YY/T 0157-2005 Spring type release on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0158-2005 Replaced

YY/T 0158-2005 Spring type gasket on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0159-2005 Abolished

YY/T 0159-2005 Steam trap fitted on pressure steam sterilizer

Publish Date: 2005-04-05

GB/T 19971-2005 Replaced

GB/T 19971-2005 Sterilization of health care products—Vocabulary

Publish Date: 2005-11-04

GB/T 19972-2005 Replaced

GB/T 19972-2005 Sterilization of health care products—Biological indicators—Guidance for the selection, use and interpretation of results

Publish Date: 2005-11-04