GB 7251.2-1997
Replaced
GB/T 14048.22-2022
Active
National standards
GB/T 14048.22-2022 Low-voltage switchgear and controlgear—Part 7-4:Ancillary equipment—PCB terminal blocks for copper conductors
GB/T 14048.22-2022 Low-voltage switchgear and controlgear—Part 7-4:Ancillary equipment—PCB terminal blocks for copper conductors
Basic Information
Standard Code:
GB/T 14048.22-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Low-voltage electrical equipment
ICS Name:
Low-voltage switchgear and controllers
Publish Date:
2022-10-12
Implement Date:
2023-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国低压电器标准化技术委员会(SAC/TC 189)
Pages:
32 pages
Scope
本文件规定了主要用于工业或类似用途的PCB接线端子排的要求。通过钎焊、压入或等效方式将铜导体安装或固定在印制电路板上,从而使两者之间形成电气或机械连接。本文件适用于额定电压交流不超过1 000 V、频率至1 000 Hz或直流不超过1 500 V的电路中,用于连接截面积为0.08 mm2~300 mm2(AWG 28/600 kcmil)的经处理或未经处理铜导体的PCB接线端子排。
Development Information
Drafting Units:
上海电器科学研究院、万可电子(天津)有限公司、成都瑞联电气股份有限公司、上海良信电器股份有限公司、上海添唯认证技术有限公司
Drafting Persons:
贾峰、顾萌、汪芳、于滨、朱骏杰、董慧
Same series standard
Replace the following standards
Referenced Standards
GB/T 9789-2008 Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture
IEC 60068-2-20
IEC 60352-1
IEC 60352-2
IEC 60352-3
IEC 60352-4
IEC 60352-5
IEC 60352-6
IEC 60352-7
IEC 60512-2-2:2003
IEC 60512-4-1
IEC 60512-5-2:2002
IEC 60512-11-7
IEC 60512-11-9
IEC 60512-11-10
IEC 60695-2-10
IEC 60695-2-11
IEC 60695-2-12
IEC 60695-2-13
IEC 60947-1:2020
IEC 60998-2-3
IEC 60999-1
IEC 60999-2
IEC 61210
Adopt standards
IEC 60947-7-4:2019
Related Standards
GB/T 11022-1999
Replaced
GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards
GB/T 18858.1-2002
Replaced
GB/T 18858.1-2002 Low-voltage switchgear and control gear Controller-device interface(CDIs)—Part 1:General rules
GB/T 18858.3-2002
Replaced
GB/T 18858.3-2002 Low-voltage switchgear and control gear—Controller-Device interface(CDI)—Part 3:Device Net
GB/Z 18859-2002
Replaced
GB/Z 18859-2002 Enclosed low-voltage switchgear and controlgear Assemblies—Guide for testing under conditions of arcing due to internal fault
GB 14048.4-2003
Replaced