GB 17646-1998
Replaced
GB/T 19072-2022
Active
National standards
GB/T 19072-2022 Wind turbines—Tower
GB/T 19072-2022 Wind turbines—Tower
Basic Information
Standard Code:
GB/T 19072-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wind energy
ICS Name:
Wind power generation systems and other energy sources
Publish Date:
2022-10-12
Implement Date:
2022-10-12
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国风力发电标准化技术委员会(SAC/TC 50)
Pages:
71 pages
Scope
本文件规定了风力发电机组塔架的设计原则、设计要求、工艺要求、试验方法、检验规则、竣工资料及随机文件、标志、包装、储存及运输等要求。本文件适用于水平轴风力发电机组塔架的设计、制造、施工和验收。
Development Information
Drafting Units:
上海泰胜风能装备股份有限公司、浙江运达风电股份有限公司、新疆金风科技股份有限公司、北京鉴衡认证中心有限公司、上海电气风电集团股份有限公司、MECAL(北京)工程技术有限公司、明阳智慧能源集团股份有限公司、重庆大学、国电联合动力技术有限公司、远景能源有限公司、中国长江三峡集团有限公司、中国船舶重工集团海装风电股份有限公司
Drafting Persons:
郭文辉、柳业、陈棋、张紫平、郝华庚、李鹏、曹广启、张强、奥云、陈志刚、宋恭杰、王宇航、朱孝晗、淮凯文、周禄飞、谭继可、陆辉、孔亮、吴红艳、韩雷岩、罗伟、孔维博
Replace the following standards
Referenced Standards
GB/T 31817-2015 Specification of coating for corrosion protection of windpower equipments
GB/T 31817-2025 Specification of coating for corrosion protection of windpower equipment
GB/T 32076.1-2015 High-strength structural bolting assemblies for preloading—Part 1:General requirements
GB/T 32076.2-2015 High-strength structural bolting assemblies for preloading—Part 2:Suitability for preloading
GB/T 32076.3-2015 High-strength structural bolting assemblies for preloading—Part 3:System HR—Hexagon bolt with large width across flats and nut assemblies
GB/T 32076.4-2015 High-strength structural bolting assemblies for preloading—Part 4:System HV—Hexagon bolt with large width across flats and nut assemblies
GB/T 32076.5-2015 High-strength structural bolting assemblies for preloading—Part 5:Plain washers
GB/T 32076.6-2015 High-strength structural bolting assemblies for preloading—Part 6:Plain chamfered washers
GB/T 32076.7-2015 High-strength structural bolting assemblies for preloading—Part 7:M39～M64—Hexagon bolt with large width acrossflats and nut assemblies
GB/T 32076.8-2017 High-strength structural bolting assemblies for preloading—Part 8:Torshear type bolt with cup head,and nut assemblies
GB/T 32076.9-2017 High-strength structural bolting assemblies for preloading—Part 9:Torshear type bolt with hexagon head with large width across flats,and nut assemblies
GB/T 32076.10-2018 High-strength structural bolting assemblies for preloading—Part 10:Assembly specifications
GB/T 32076.11-2024 High-strength structural bolting assemblies for preloading—Part 11:Load indicating washer
GB 50009-2012 Load code for the design of building structures
GB 50010-2010 Code for design of concrete structures
GB 50011-2010 Code for seismic design of buildings
GB/T 50046-2018 Code for anticorrosion design of industrial constructions
GB 50119-2013 Code for concrete admixture application
GB 50135-2019 Standard for design of high-rising structures
GB 50164-2011 Standard for quality control of concrete
GB 50204-2015 Concrete Structure Construction Quality Acceptance Standards
GB 50212-2014 Code for construction of building anticorrosive engineering
GB/T 50448-2015 Technical code for application of cementitious grout
GB 50666-2011 Code for construction of concrete structures
JB/T 10045-2017 JB/T 10045-2017 Quality and geometric technical specifications for thermal cutting
JB/T 11218-2020 Wind power generation tower flange forged piece
JB/T 11218-2011 Wind power generation tower flange forgings
JG/T 161-2004 Unbonded prestressing steel strand
JG/T 161-2016 Unbonded prestressing steel strand
JG/T 430-2014 Anticorrosion lubricating grease for unbonded tendons
JGJ/T 10-2011 Technical specification for construction of concrete pumping
JGJ 18-2003 Specification for welding and acceptance of reinforcing steel bars
JGJ 18-2012 Specification for welding and acceptance of reinforcing steel bars
JGJ 55-2011 Specification for mix proportion design of ordinary concrete
JGJ 63-2006 Standard of water for concrete
JGJ 85-2010 Technical specification for application of anchorage, grip and coupler for prestressing tendons
JGJ/T 140-2019 Standard for seismic design of prestressed concrete structures
JGJ/T 281-2012 Technical specification for application of high strength concrete
JGJ 369-2016 Code for design of prestressed concrete structures
NB/T 31082-2016 High-strength bolted connection set for wind turbine tower
NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing
NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing"
NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing
NB/T 47013.10-2015 Non-destructive testing of pressure equipment - Part 10: Ultrasonic testing using time-of-flight diffraction method
NB/T 47013.10-2010 Nondestructive testing of pressure equipments-Part 10:Ultrasonic time of flight diffraction technique
NB/T 47014-2023 Pressure equipment welding process qualification
NB/T 47015-2023 Stress vessel welding procedure
NB/T 47016-2023 The mechanical properties of welded specimens for pressure equipment products are tested
ISO 2808
ISO 2813
ISO 3834
ISO 4628(所有部分)
ISO 9712
ISO 12944
ISO 13588
ISO 14555
ISO 15614-1
ISO/TR 17671-2
ISO 19840
EN 1991-1-4:2005
EN 1993-1-6
EN 1993-1-9
IIW-2259-15
Related Standards
GB 18451.1-2001
Replaced
GB 18451.1-2001 Wind turbine generator systems—Safety requirements
GB/T 2900.53-2001
Active
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB/T 18709-2002
Active
GB/T 18709-2002 Methodology of wind energy resource measurement for wind farm
GB/T 18710-2002
Active
GB/T 18710-2002 Methodology of wind energy resource assessment for wind farm
GB/T 4750-2002
Replaced