GB/T 3654.10-1983
Replaced
GB/T 5686.4-2022
Active
National standards
GB/T 5686.4-2022 Ferromanganese,ferromanganese-silicon,nitrogen-bearing ferromanganese and manganese metal—Determination of phosphorus content—Molybdenum blue spectrophotometric method and bismuth phosphomolybdate blue spectrophotometric method
GB/T 5686.4-2022 Ferromanganese,ferromanganese-silicon,nitrogen-bearing ferromanganese and manganese metal—Determination of phosphorus content—Molybdenum blue spectrophotometric method and bismuth phosphomolybdate blue spectrophotometric method
Basic Information
Standard Code:
GB/T 5686.4-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for steel and iron alloys
ICS Name:
Iron alloy
Publish Date:
2022-10-12
Implement Date:
2023-02-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国生铁及铁合金标准化技术委员会(SAC/TC 318)
Pages:
13 pages
Scope
本文件描述了采用钼蓝分光光度法和铋磷钼蓝分光光度法测定锰铁、锰硅合金、氮化锰铁和金属锰中的磷含量的方法。本文件适用于锰铁、锰硅合金、氮化锰铁和金属锰中磷含量的测定。测定范围（质量分数）：0.003 0%～0.650%。方法一：钼蓝分光光度法，适用于锰铁、锰硅合金、氮化锰铁和金属锰中磷含量的测定，测定范围（质量分数）：0.003 0%～0.450%；方法二：铋磷钼蓝分光光度法，适用于锰铁、锰硅合金、氮化锰铁和金属锰中磷含量的测定，测定范围（质量分数）：0.003 0%～0.650%。
Development Information
Drafting Units:
四川川投峨眉铁合金(集团)有限责任公司、湘西自治州丰达合金科技有限公司、安徽长江钢铁股份有限公司、吉铁铁合金有限责任公司、河北津西国际贸易有限公司、中信锦州金属股份有限公司、冶金工业信息标准研究院
Drafting Persons:
方艳、刘惠丽、唐华应、王国宁、陈荣、杨家冬、李京霖、吕雪梅、刘冰、王敏、叶小爽、吴银军、卢春生、张晨
Same series standard
GB/T 5686.1-2022 Ferromanganese,ferromanganese-sili4con,nitrogen-bearing ferromanganese and manganese metal—Determination of manganese content—Potentiometric method,titrimetric method after ammonium nitrate oxidation and titrimetric method after perchloric acid oxidation
GB/T 5686.2-2022 Ferromanganese,ferromanganese-silicon,nitrogen-bearing ferromanganese and manganese metal—Determination of silicon content—Molybdenum blue spectrophotometric method,silicon potassium fluoride titrimetric method and perchloric acid dehydration gravimetric method
GB/T 5686.7-2022 Ferromanganese,ferromanganese-silicon,nitrogen-bearing ferromanganese and manganese metal—Determination of sulfur content—Infrared absorption method and combustion-neutralization method
Replace the following standards
Referenced Standards
GB/T 4010-1994 Ferroalloys—Sampling and preparation of samples for chemical analysis
GB/T 4010-2015 Ferroallys sampling and preparation of samples for chemical analysis
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 12806-1991 Laboratory glassware—One-mark volumetric flasks
GB/T 12806-2011 Laboratory glassware—One-mark volumetric flasks
GB/T 12807-1991 Laboratory glassware—Graduated pipettes
GB/T 12807-2021 Laboratory glassware—Graduated pipettes
GB/T 12808-1991 Laboratory glassware—One-mark pipettes
GB/T 12808-2015 Laboratory glassware—One mark pipettes
Related Standards
GB/T 3654.1-1983
Active
GB/T 3654.1-1983 Methods for chemical analysis of ferroniobium—The paper chromatograph-gravimetric method for the determination of niobium and tantalum
GB/T 3654.2-1983
Replaced
GB/T 3654.2-1983 Methods for chemical analysis of ferroniobium—The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 3654.3-1983
Replaced
GB/T 3654.3-1983 Methods for chemical analysis of ferroniobium The gravimetric method for the determination of silicon content
GB/T 3654.4-1983
Active
GB/T 3654.4-1983 Methods for chemical analysis of ferroniobium The combustion gravimetric method for the determination of carbon content
GB/T 3654.5-1983
Active