GB/T 4146-1984
Replaced
GB/T 16603-2017
Active
National standards
GB/T 16603-2017 Polyamide drawn yarn
GB/T 16603-2017 Polyamide drawn yarn
Basic Information
Standard Code:
GB/T 16603-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Chemical fibers
ICS Name:
Artificial fibers
Publish Date:
2017-05-12
Implement Date:
2017-12-01
Pages:
8 pages
Scope
This standard specifies the terms and definitions, classification and marking, technical requirements, test methods, inspection rules and marking, packaging, transportation, and storage requirements for nylon drawn filament. This standard applies to nylon 6 and nylon 66 drawn filament for civilian use with a linear density of 6 dtex to 600 dtex, a single filament linear density of 0.45 dtex to 35 dtex, a circular cross-section, and a glossy, semi-matte, or fully matte finish, which have not been twisted or heat-set. Other types of nylon drawn filament can be used as a reference for application.
Development Information
Replace the following standards
Referenced Standards
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 4146.1(所有部分)
GB 250-1995 Gray scale for assessing change in colour
GB/T 250-2008 Textiles—Tests for colour fastness—Grey scale for assessing change in colour
GB/T 3291.1-1997 Textiles—Terms of textiles material properties and test—Part 1:Fibre and yarn
GB/T 3291.3-1997 Textiles—Terms of textiles material properties and test—Part 3:General
GB/T 6502-2001 Sampling method for synthetic filament yarns
GB/T 6502-2008 Sampling method of man-made filament yarns
GB/T 6503-2001 Test method for moisture regain in synthetic filament yarns
GB/T 6503-2008 Testing method for moisture regain of man-made fibres
GB/T 6503-2017 Man-made fibres—Test method of moisture regain
GB/T 6505-2001 Test method for thermal shrinkage of synthetic filament yarns
GB/T 6505-2008 Testing method for thermal shrinkage of man-made filament yarns
GB/T 6505-2017 Man-made fiber—Test method for thermal shrinkage of filament yarns(after treatment）
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 14343-2003 Testing method for linear density of synthetic filament yarns
GB/T 14343-2008 Testing method for linear density of man-made filament yarns
GB/T 14344-2003 Testing method for drawability of synthetic filament yarns
GB/T 14344-2008 Testing method for tensile of man-made filament yarns
GB/T 14344-2022 Man-made fibre—Test method for tensile properties of filament yarns
GB/T 14346-1993 Testing method for yarn irregularity of man-made filament yarns by means of electronic evenness tester
GB/T 14346-2015 Man-made fiber—Testing method for unevenness of filament yarns—Capacitance method
FZ/T 50008-1996 The test method for uniform dyeing of polyamide filament
FZ/T 50008-2015 Test method for dyeing uniformity of polyamide filament yarns
FZ/T 50027-2015 Man-made fibres—Test method for determination of the titanium dioxide content
Related Standards
GB/T 6509-1986
Replaced
GB/T 6509-1986 Method for determination of low molecular weight compounds content in polyamide 6
GB/T 9997-1988
Replaced
GB/T 9997-1988 Man-made fibres—Determination of breaking strength and elongation of individual fibres
GB/T 14334-1993
Replaced
GB/T 14334-1993 Sampling method of synthetic staple fibres
GB/T 14335-1993
Replaced
GB/T 14335-1993 Testing method for linear density of synthetic staple fibres
GB/T 14336-1993
Replaced