GB/T 17457-1998
Replaced
GB/T 33637-2017
Replaced
National standards
GB/T 33637-2017 Cathodicprotection—MMO/Ti flexible anode
GB/T 33637-2017 Cathodicprotection—MMO/Ti flexible anode
Basic Information
Standard Code:
GB/T 33637-2017
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Other processing and plating
Publish Date:
2017-05-31
Implement Date:
2017-12-01
Pages:
20 pages
Scope
This standard specifies the terms, definitions, and abbreviations, technical requirements, inspection methods and rules, usage regulations, and other requirements for MMO/Ti flexible anodes (hereinafter referred to as the product) used for cathodic protection. This standard applies to the cathodic protection of buried steel facilities in soil environmental conditions. The cathodic protection of other buried metal facilities can also be used for reference.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 15078-2008 Testing method for contact resistance of precious metals electrical contact materials
ASTM D6241
GB/T 2001-1991 Coke—Determination of proximate analysis
GB/T 2001-2013 Coke—Determination of proximate analysis
GB/T 3623-1998 Titanium and titanium alloy wire
GB/T 3623-2007 Titanium and titanium alloy wire
GB/T 3623-2022 Titanium and titanium alloy wire
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 12706.1-2002 Power cables with extruded insulation and their accessories for rated voltages from 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)—Part 1:Cables for rated voltages of 1kV(Um=1.2kV) and 3kV(Um=3.6kV)
GB/T 12706.1-2008 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um=1.2 kV)up to 35 kV(Um=40.5 kV)—Part 1:Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV)
GB/T 12706.1-2020 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 1:Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV)
GB/T 19976-2005 Textiles—Determination of bursting strength—Steel ball method
GB/T 21196.2-2007 Textiles—Determination of the abrasion resistance of fabrics by the Martindale method—Part 2:Determination of specimen breakdown
GB/T 24521-2009 Method for the determination of specific resistance of coke
GB/T 24521-2018 Method for the determination of specific resistance of carbon raw materials and coke
FZ/T 54064-2012 Polyester monofilament
YS/T 587.12-2006 Calcined coke for prebaked blocks—Testing methods—Part 12:Determination of particle size distribution
YS/T 828-2012 Titanium anodes for use in cathodic protection of soils or natural waters
YS/T 828-2022 Cathodic protection titanium anode for use
GB/T 21196.2-2025 Textiles—Determination of the abrasion resistance of fabrics by the Martindale method—Part 2:Determination of specimen breakdown
FZ/T 54064-2025 Polyester filament yarn
Related Standards
GB/T 17458-1998
Abolished
GB/T 17458-1998 Ductile iron pipes—Centrifugal cement mortar lining—Composition controls of freshly applied mortar
JG/T 133-2000
Abolished
JG/T 133-2000 Fluorocarbon coatings on architectural aluminum extrusions and panels
GB/T 17457-2009
Replaced
GB/T 17457-2009 Ductile iron pipes and fittings—Cement mortar lining
GA 923-2011
Active
GA 923-2011 Specification of special police vehicle unified appearance coating
GB/T 26825-2011
Active