GB 5590-1985
Replaced
GB/T 22380.3-2019
Active
National standards
GB/T 22380.3-2019 Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves
GB/T 22380.3-2019 Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves
Basic Information
Standard Code:
GB/T 22380.3-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Explosion-proof electrical appliances
ICS Name:
Electric equipment for use in explosive environments
Publish Date:
2019-12-10
Implement Date:
2020-07-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国防爆电气设备标准化技术委员会(SAC/TC 9)
Pages:
14 pages
Scope
GB/T 22380的本部分规定了安装在加油站、以不大于200 L/min的流量给车辆、船只、轻型飞机或移动式罐体容器添加液体燃料的燃油加油机（以下简称“加油机”)用的剪切阀的防爆措施、结构、物理性能、使用要求、试验和使用信息。
本部分适用于安装在加油站、以不大于200 L/min的流量给车辆、船只、轻型飞机或移动式罐体容器添加液体燃料的燃油加油机用剪切阀。
本部分适用于在环境温度－20 ℃～＋40 ℃下使用的剪切阀。
Development Information
Drafting Units:
南阳防爆电气研究所有限公司、北京三盈联合石油技术有限公司、托肯恒山科技(广州)有限公司、郑州永邦测控技术有限公司、国家防爆电气产品质量监督检验中心、江阴市富仁高科股份有限公司、正星科技股份有限公司、浙江春晖智能控制股份有限公司、优必得石油设备(苏州)有限公司
Drafting Persons:
张刚、王军、季鹏、张星辉、张材、徐东成、梁柏松、姚开利、朱建国、王巧立
Same series standard
Replace the following standards
Referenced Standards
GB/T 22380.1-2017 Explosion protected safety technique of the petrol filling station—Part 1: Explosion protected safety technique requirementsfor fuel filling dispenser
GB 25286.1-2010 Non-electrical equipment for explosive atmospheres—Part 1:Basic method and requirements
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 5464-1999 Non-combustibility test method of building materials
GB/T 5464-2010 Non-combustibility test method for building materials
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 12716-2002 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on the threads
GB/T 12716-2011 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
GB 17930-1999 Unleaded petrol(gasoline)for motor vehicles
GB 17930-2006 Gasoline for motor vehicles
GB 17930-2011 Gasoline for motor vehicles
GB 17930-2013 Gasoline for motor vehicles
GB 17930-2016 Gasoline for motor vehicles
GB 18351-2001 Ethanol gasoline for motor vehicles
GB 18351-2004 Ethanol gasoline for motor vehicles
GB 18351-2010 Ethanol gasoline for motor vehicles(E10)
GB 18351-2013 Ethanol gasoline for motor vehicles(E10)
GB 18351-2015 Ethanol gasoline for motor vehicles(E10）
GB 18351-2017 Ethanol gasoline for motor vehicles (E10)
GB 25285.1-2010 Explosive atmospheres—Explosion prevention and protection—Part 1:Basic concepts and methodology
GB/T 25285.1-2021 Explosive atmospheres—Explosion prevention and protection—Part 1:Basic concepts and methodology
GB 18351-2025 Ethanol gasoline for motor vehicles
GB/T 5464-2026 Non-combustibility test method for building materials
Related Standards
GB 3836.9-1990
Replaced
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.11-1991
Replaced
GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap
GB 3836.12-1991
Replaced
GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GB 3836.13-1997
Replaced
GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres
MT 703-1997
Replaced