GB/T 902.3-2008 Replaced National standards

GB/T 902.3-2008 Weld studs for capacitor discharge welding

GB/T 902.3-2008 Weld studs for capacitor discharge welding

Publish Date: 2008-08-25 Implement Date: 2009-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 902.3-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Fasteners

ICS Name: Bolts, screws, and studs

Publish Date: 2008-08-25

Implement Date: 2009-02-01

Pages: 8 pages

Scope

This section specifies the threaded welding studs (PT type) for energy storage welding with thread sizes ranging from M3 to M8, and the internal threaded welding studs (IT type) with nominal diameters ranging from 5 mm to 7.1 mm.

Development Information

Word Count: 10 Thousand words Pages: 8 pages

Same series standard

GB/T 902.1-2008 Weld studs for manual welding

Replace the following standards

GB/T 902.3-1989

Superseded by the following standards

GB/T 10433-2024 Fasteners—Studs and ceramic ferrules for arc stud welding

Referenced Standards

GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 3098.10 GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 196-2003 General purpose metric screw threads—Basic dimensions GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 197-2018 General purpose metric screw threads—Tolerances GB/T 1237-2000 Designation system for fasteners GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 3098.6-2000 Mechanical properties of fasteners—Bolts, screws and studs made of stainless-steel GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs GB/T 3098.6-2023 Mechanical properties of fasteners—Stainless steel bolts,screws and studs GB/T 16938-1997 Fasteners—General requirements for blots,screws,studs and nuts GB/T 16938-2008 Fasteners—General requirements for bolts,screws,studs and nuts GB/T 196-2025 General purpose metric screw threads—Basic dimensions

Adopt standards

ISO 13918:1998

Related Standards

GB/T 3750.3-1983 Replaced

GB/T 3750.3-1983 Hollow screws

Publish Date: 1983-06-17

GB/T 5277-1985 Active

GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws

Publish Date: 1985-08-01

GB/T 6560-1986 Replaced

GB/T 6560-1986 Cross recessed pan head thread forming screws

Publish Date: 1986-07-02

GB/T 6561-1986 Replaced

GB/T 6561-1986 Cross recessed countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6562-1986 Replaced

GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6563-1986 Replaced

GB/T 6563-1986 Hexagon head thread forming screws

Publish Date: 1986-07-02