GB/T 3750.3-1983
Replaced
GB/T 3098.6-2014
Replaced
National standards
GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs
GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs
Basic Information
Standard Code:
GB/T 3098.6-2014
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Fasteners
ICS Name:
Bolts, screws, and studs
Publish Date:
2014-06-24
Implement Date:
2015-03-01
Pages:
29 pages
Scope
This part of GB/T 3098 specifies the mechanical properties of bolts, screws, and studs made from austenitic, martensitic, and ferritic corrosion-resistant stainless steels, when tested at an ambient temperature of 10℃ to 35℃. At higher or lower temperatures, their performance may vary.
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 90.3-2010 Fasteners—Quality assurance system
GB/T 192-2003 General purpose metric screw threads—Basic profile
GB/T 193-2003 General purpose metric screw threads—General plan
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method
GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels
GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels
GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels
GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels
GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels
GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels
GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels
GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid
GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method
GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method
GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method
GB/T 5267.4-2009 Passivation of corrosion-resistant stainless-steel fasteners
GB/T 9144-2003 General purpose metric screw threads—Preferable plan
GB/T 192-2025 General purpose metric screw threads—Profiles
GB/T 9144-2025 General purpose metric screw threads—Preferable plan
Adopt standards
ISO 3506-1:2009
Related Standards
GB/T 5277-1985
Active
GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws
GB/T 6560-1986
Replaced
GB/T 6560-1986 Cross recessed pan head thread forming screws
GB/T 6561-1986
Replaced
GB/T 6561-1986 Cross recessed countersunk head thread forming screws
GB/T 6562-1986
Replaced
GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws
GB/T 6563-1986
Replaced