GB/T 30845.1-2014 Replaced National standards

GB/T 30845.1-2014 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems(HVSC-Systems)—Part 1:General requirements

GB/T 30845.1-2014 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems(HVSC-Systems)—Part 1:General requirements

Publish Date: 2014-06-24 Implement Date: 2015-01-22 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 30845.1-2014
Standard Type: National standards
Standard Status: Replaced
is_force_gb: no
CCS Name: Low-voltage electrical equipment
ICS Name: Plugs, sockets, and connectors
Publish Date: 2014-06-24
Implement Date: 2015-01-22
Pages: 41 pages

Scope

This part of GB/T 30845 specifies the technical requirements for plugs, sockets, and marine couplers used in high-voltage shore power connection systems (HVSC systems), including their structure, electrical performance, and mechanical properties.
This part is applicable to electrical accessories with a rated current not exceeding 500 A, a rated working voltage not exceeding 12 kV, and a frequency of 50/60 Hz, equipped with no more than three control contacts for three-phase (3-pole with grounding) and single-pole (neutral line) applications.
The electrical accessories are primarily used in outdoor and marine environments, with an ambient temperature ranging between -25 °C and 45 °C, to enable ships to connect to high-voltage shore power supply systems.
The electrical accessories are not intended for use in hazardous locations. In special hazardous locations, it may be necessary to stipulate additional requirements.
The electrical accessories are intended for use only in connecting copper or copper alloy cables.
Sockets or marine input sockets installed in electrical equipment or fixed to such equipment are also within the scope of this part.

Development Information

Word Count: 70 Thousand words Pages: 41 pages

Same series standard

Superseded by the following standards

Referenced Standards

GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions GB/T 6994-2006 Electrical installation in ships—Definitions and general requirements GB 13539.1-2008 Low-voltage fuses—Part 1:General requirements GB/T 13539.2-2008 Low-voltage fuses—Part 2:Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application)—Examples of standardized systems of fuses A to I GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests IEC 60092(所有部分) IEC 60502-4:2010 IEEE 1580 ASTM B 117-1985 GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests GB/T 2423.55-2023 Environmental testing—Part 2:Test methods—Test Eh:Hammer tests GB/T 3956-1997 Conductors of insulated cables GB/T 3956-2008 Conductors of insulated cables GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 5169.11-1997 Fire hazard testing for electric and electronic products—Test methods—Glow-wire end-product test and guidance GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT) GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 5169.21-2017 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test method GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards GB/T 11022-2011 Common specifications for high-voltage switchgear and controlgear standards GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code) GB/T 20138-2023 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)

Adopt standards

IEC 62613-1:2011

Related Standards

Contact Us