DZ/T 0101.12-1994
Active
JJF 1701.4-2019
Active
National Metrology Technical Specifications JJF
JJF 1701.4-2019 Program of Pattern Evaluation of Instrument Transformers—Part 4:Current Transformers
JJF 1701.4-2019 Program of Pattern Evaluation of Instrument Transformers—Part 4:Current Transformers
Basic Information
Standard Code:
JJF 1701.4-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
-
ICS Name:
-
Publish Date:
2019-12-31
Implement Date:
2020-03-31
Pages:
60 pages
Scope
This outline is applicable to the type evaluation of current transformers used for measurement, which are classified and coded as 15280500 in the instrumentation catalogue.
This outline is applicable to electromagnetic current transformers used for electrical measurement, with a frequency of 50 Hz and a rated secondary current of 5 A or 1 A.
Development Information
Same series standard
JJF 1701.3-2019 Program of Pattern Evaluation of Instrument Transformers—Part 3:Inductive Voltage Transformers
JJF 1701.5-2019 Program of Pattern Evaluation of Instrument Transformers—Part 5:Capacitor Voltage Transformers
JJF 1701.6-2019 Program of Pattern Evaluation of Instrument Transformers—Part 6:Three-phase Combined Instrument Transformers
Referenced Standards
GB/T 20840.1-2010 Instrument transformers—Part 1:General requirements
GB/T 20840.2-2014 Instrument transformers—Part 2:Additional requirements for current transformers
IEC 60376
JJG 313-2010 Instrument Current Transformers
GB 156-2003 Standard voltages
GB/T 156-2007 Standard voltages
GB/T 156-2017 Standard voltages
GB 311.1-1997 Insulation co-ordination for high voltage transmission and distribution equipment
GB/T 311.1-2012 Insulation co-ordination—Part 1:Definitions,principles and rules
GB/T 2423.23-1995 Environmental testing for electric and electronic products Test Q:Sealing
GB/T 2423.23-2013 Environmental testing—Part 2:Test methods—Test Q:Sealing
GB/T 3954-2001 Aluminium rod for electrical purpose
GB/T 3954-2008 Aluminium and aluminium alloys rod for electrical purpose
GB/T 3954-2014 Aluminium and aluminium alloys rod for electrical purpose
GB/T 3954-2022 Aluminium and aluminium alloys rod for electrical purpose
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB 5585.1-1985 Copper or aluminium and its alloy bus bars for electrical purposes—Part 1:General
GB/T 5585.1-2005 Copper or aluminium and its alloy bus bars for electrical purposes—Part 1:Copper and copper alloy bus bars
GB/T 5585.1-2018 Copper or aluminium and its alloy bus bars for electrical purposes—Part 1:Copper and copper alloy bus bars
GB/T 5832.2-1986 Determination of trace water in the gases—Dew point method
GB/T 5832.2-2008 Determination of moisture in gases—Part 2:Dew point method
GB/T 5832.2-2016 Gas analysis—Determination of moisture—Part 2:Dew point method
GB/T 7354-2003 Partial discharge measurements
GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements
GB 7674-1997 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
GB/T 7674-2008 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
GB/T 7674-2020 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
GB/T 8905-1996 The guide for processing and measuring SF6 gas in power apparatus
GB/T 8905-2012 The guide for management and measuring SF6 gas in electrical equipment
GB/T 11604-2015 Testing procedure of radio interference generated by high voltage equipment
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
GB/T 16927.2-1997 High-voltage test techniques Part 2:Measuring systems
GB/T 16927.2-2013 High-voltage test techniques—Part 2:Measuring systems
GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)
GB/T 20138-2023 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)
DL/T 506-2018 The method for measuring humidity of insulating gas in SF6 electrical equipment
DL/T 506-2007 The method for measuring humidity of the insulating gas in SF6 electrical equipment
JJG 313-1994 Verification Regulation of Current Transformers of Measuring Service
GB/Z 156-2025 Good practice for dynamic light scattering(DLS) measurements
Related Standards
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
\nDZ 4-1981 Method for Compiling Product Models of Geological Instrumentation Equipment
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active